User manual AEG FSE63600P

[. . . ] Het programma geschikt is voor het type lading en de mate van bevuiling. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. visit our website for: Get usage advice, brochures, trouble shooter, service information: www. Buy Accessories, Consumables and Original spare parts for your appliance: www. [. . . ] How to deactivate the rinse aid empty notification Make sure the appliance is in user mode. The display shows the current = the rinse aid empty = the rinse aid empty It is possible to set the released quantity of rinse aid between level 1 (minimum quantity) and level 6 (maximum quantity). Level 0 deactivates the rinse aid dispenser and no rinse aid is released. How to set the rinse aid level Make sure the appliance is in user mode. The levels of rinse aid range from 0A to 6A where level 0A means rinse aid is not used. There is also an acoustic signal that sounds when the programme is completed. How to activate the acoustic signal for the end of programme Make sure the appliance is in user mode. The display shows the current AirDry improves the drying results with less energy consumption. During the drying phase, the door opens automatically and remains ajar. Do not try to close the appliance door within 2 minutes after automatic opening. If, afterwards, the door is closed for another 3 minutes, the running programme ends. airDry is automatically activated with all programmes excluding (if applicable). To improve the drying performance refer to the XtraDry option or activate AirDry. If children have access to the appliance, it is advised to deactivate AirDry as opening the door may pose a danger. Desired options must be activated every time before you start a programme. It is not possible to activate or deactivate options while a programme is running. If you select non compatible options, the appliance automatically deactivates one or more of them. If an option is not applicable to a programme, the related indicator is off or it flashes quickly for a few seconds and then goes out. After you fill the salt container, immediately start the shortest programme to prevent corrosion. Fill the dispenser (B) until the rinse aid reaches the marking ''MAX''. Remove the spilled rinse aid with an absorbent cloth to prevent excessive foam formation. Set and start a programme suitable for the type of load and the degree of soil. [. . . ] From the inside of the appli- Make sure that the spray arms can rotate freely. The amperage is insufficient to supply simultaneously all the appliances in use. Check the socket amperage and the capacity of the meter or turn off one of the appliances in use. Refer to "Before first use", "Daily use", or "Hints and tips" for other possible causes. [. . . ]