User manual AEG FSB41600Z

[. . . ] Het programma geschikt is voor het type lading en de mate van bevuiling. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. visit our website for: Get usage advice, brochures, trouble shooter, service information: www. Buy Accessories, Consumables and Original spare parts for your appliance: www. [. . . ] If standard detergent or multi-tablets without rinse aid are used, activate the notification to keep the rinse aid refill indicator active. How to deactivate the rinse aid empty notification Make sure the appliance is in user mode. The display shows the current = the rinse aid empty notification is activated (factory setting). There is also an acoustic signal that sounds when the programme is completed. How to activate the acoustic signal for the end of programme Make sure the appliance is in user mode. The display shows the current AirDry improves the drying results with less energy consumption. During the drying phase, the door opens automatically and remains ajar. Do not try to close the appliance door within 2 minutes after automatic opening. airDry is automatically activated with all programmes excluding (if applicable). To improve the drying performance refer to the XtraDry option or activate AirDry. If children have access to the appliance, it is advised to deactivate AirDry as opening the door may pose a danger. Desired options must be activated every time before you start a programme. It is not possible to activate or deactivate options while a programme is running. If you select non compatible options, the appliance automatically deactivates one or more of them. If an option is not applicable to a programme, the related indicator is off or it flashes quickly for a few seconds and then goes out. Activating options can affect the water and energy consumption as well as the programme duration. With XtraDry on, the Make sure that the current level of the water softener agrees with the hardness of the water supply. The display shows the current Duration of some programmes, water consumption and the last rinse temperature can be affected. In the other programmes the setting of XtraDry is permanent and it is automatically used in next cycles. After starting the programme, the appliance recharges the resin in the water softener for up to 5 minutes. The salt is used to recharge the resin in the water softener and to assure good washing results in daily use. Opening the door while the appliance operates Opening the door while a programme is running stops the appliance. [. . . ] The amperage is insufficient to supply simultaneously all the appliances in use. Check the socket amperage and the capacity of the meter or turn off one of the appliances in use. Refer to "Before first use", "Daily use", or "Hints and tips" for other possible causes. Once you have checked the appliance, deactivate and activate the appliance. [. . . ]