User manual AEG CS FMP 200

[. . . ] ISO- Stecker Block B Kontakt B1 B2 B3 B4 B5 B6 B7 B8 Funktion Englischer Kabelaufdruck Lautsprecher rechts hinten + Speaker right rear + Lautsprecher rechts hinten Lautsprecher rechts vorne Lautsprecher rechts vorne Lautsprecher links vorne Lautsprecher links vorne Lautsprecher links hinten Lautsprecher links hinten - Speaker right rear + Speaker right front + - Speaker right front + Speaker left front + - Speaker left front + Speaker left rear + - Speaker left rear - ISO- Stecker Block C Kontakt C1 C2 C3 Funktion Englischer Kabelaufdruck Vorverstärkerausgang links Line out left Vorverstärkerausgang Masse Line out ground Vorverstärkerausgang rechts Line out right Installation-----------------------------------Take out screw before installation--DIN Front-Mount (Method A)----------Installing the unit--------------------------Removing the unit-------------------------DIN Rear-Mount (Method B)-----------Using the detachable Front panel---Wiring Conection--------------------------Operation-------------------------------------Switching ON / OF the unit------------Faceplate release-------------------------Sound adjustment-------------------------Loudnes---------------------------------------Display----------------------------------------Equalization---------------------------------Liquid crystal display--------------------Reset function------------------------------Radio operation----------------------------Switching to radio mode----------------Selecting the frequency band---------Selecting station---------------------------Local / distand------------------------------Automatic memory storing & program scanning--------------------------Station storing-------------------------------RDS operation-------------------------------CD operation---------------------------------Switching to CD mode--------------------Selecting tracks-----------------------------3 3 3 3 4 5 6 7 8 9 9 9 10 10 10 10 11 11 11 11 11 11 11 11 11 13 13 13 Pausing playing-----------------------------Previewing all track------------------------Repeating the same track----------------Playing all track in random ---------------Ejecting a disc-------------------------------MP3 operation-------------------------------Switch to CD (MP3) mode----------------Ejecting a disc --------------------------------Selecting tracks in single step----------Selecting directory up / down-----------Pausing playing----------------------------Previewing all track------------------------Repeating the same track----------------Playing all tracks in random-------------Selecting tracks by AMS / MP3 button Display information-------------------------Disc notes--------------------------------------Specification-----------------------------------Trouble shooting------------------------------Warranty-----------------------------------------EC Type-Approval certificate-------------Service address and hotline--------------Retraction of old devices------------------13 13 13 13 13 13 13 14 14 14 14 14 14 14 14 15 15 17 18 19 19 20 20 Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. Use only the parts included with the unit to ensure proper installation. Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle. [. . . ] - BEEP 2'nd mode: The beep is only generated when all allowed double key is pressed long (1 sec). DISPLAY Press DSP button (15) to operate as the conversion of each display mode as follows: - In case of receiving a RDS station In radio mode: ->PS ->CT ->FREQ ->PTY -> In CD mode: ->CD ->CT ->PS ->FREQ ->PTY -> - In case of no receiving CT or PTY information, the display shows as "NO CLOCK" or "NO PTY". In CD mode: -> CD -> CT -> FREQ -> "NO PTY" -> Each displaying time is several seconds, and come back to 1st position after several seconds. RESET FUNCTION RESET button (24) must be activated with either a ballpoint pen or thin metal object. The RESET button is to be activated for the following reasons: - Initial installation of the unit when all wiring is completed. Note: if press RESET button (24), the unit can't work yet, please use a cotton swab socked in isopropyl alcohol to clean the socket on the front panel. RADIO OPERATION SWITCHING TO RADIO MODE Press MOD button (6) shortly to select radio mode, the radio mode appears in the display together with the memory band an frequency. Search is finished, And then 6 strongest stations are stored into the corresponding preset number button. - Program scanning Press AMS button (18) shortly to scan preset station, When the field strength level is more than the threshold level of stop level, the radio is holding at that preset number for several seconds with release mute, then searches again. STATION STORING Press any one of the preset buttons (14) (1 to 6) to select a station, which had been stored in the memory. Press this button for several seconds (until 2ND beeps come out), current station is stored into the number button. When the unit was in CD (MP3), it will switch temporarily to radio mode. Temporary switch over to an EON linked station when EON detects a traffic announcement on that other program. if the volume level was under the threshold point it will be raised to the threshold point. But the user changed the volume level, which was more than the threshold point (min. The purpose of this key is to reduce unwanted EON TA switching, which EON TA information was received from current station and the radio switched to that EON linked station, but no information could not be received because the EON linked station is located too far from that area. In above operation, a customer listens to a wrong program or mute sound for a while. EON TA LOCAL mode When the filed strength level of EON linked is less than threshold level, the radio does not switch that station, and a customer can hardly listen to any disturbances. When EON TA LOCAL mode is selected, "EON TA LO" on numeric display is indicated for a few seconds. When EON TA DISTANCE mode is selected, "EON TA DX" on numeric display is indicated for a few seconds. PI: Program Identification code Code for identifying programs PS: Program Service Name Broadcast station name data expressed in alphanumerically characters AF: Alternative Frequencies Frequency list of broadcasting stations transmitting the same program TP: Traffic Program Identification Identification data for traffic information-broadcasting station TA: Traffic Announcement Identification Identification data showing traffic information is being transmitted or not EON: Enhanced Other Networks Information Broadcasting information on PI, AF, TP, TA, etc, relating to networks other than the network used for current reception PTY: Program Type Code Contents of programs such as news, light music, sports etc. CD OPERATION SWITCHING TO CD MODE If there is no CD inserted in the driver: Gently insert the CD with the printed side uppermost into the CD compartment until you feel some resistance, . [. . . ] DISPLAY INFORMATION Press DSP button to show the following information, such as the clock, ID3 TAG (if available: song title directory name, artist name, other contents. Do not stick paper or tape, etc, onto the label side or the recording side of any discs, as it may cause a malfunction. Be sure to use discs with following marks only for the unit to play: The unit cannot play a CD-R and CD-RW that is not finalized. (Please refer to the manual of your CD-R/CD-RW recorder or CD-R/CD-RW software for more information on finalization process). [. . . ]