User manual AEG-ELECTROLUX ZUSG3901

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AEG-ELECTROLUX ZUSG3901. We hope that this AEG-ELECTROLUX ZUSG3901 user guide will be useful to you.


AEG-ELECTROLUX ZUSG3901 : Download the complete user guide (10656 Ko)

You may also download the following manuals related to this product:

   AEG-ELECTROLUX ZUSG3901 (18240 ko)
   AEG-ELECTROLUX ZUSG3901 (18240 ko)
   AEG-ELECTROLUX ZUSG3901 (18240 ko)
   AEG-ELECTROLUX ZUSG3901 (18240 ko)
   AEG-ELECTROLUX ZUSG3901 (18240 ko)
   AEG-ELECTROLUX ZUSG3901 (14337 ko)
   AEG-ELECTROLUX ZUSG3901 (18240 ko)
   AEG-ELECTROLUX ZUSG3901 (14337 ko)
   AEG-ELECTROLUX ZUSG3901 (18240 ko)
   AEG-ELECTROLUX ZUSG3901 (18240 ko)
   AEG-ELECTROLUX ZUSG3901 (18240 ko)

Manual abstract: user guide AEG-ELECTROLUX ZUSG3901

Detailed instructions for use are in the User's Guide.

[. . . ] Adjust the telescopic tube by holding the lock with one hand and pulling the handle with the other hand. Models with remote control can also be operated by the ON/OFF button on the handle. FIL TE R Use the + or ­ rocker button on the cleaner to adjust suction power. [. . . ] We recommend to change the the washable filter also at least once in a year or when it is very dirty or damaged. Open the filter lid by pushing the two buttons simultaneously under the handle. Lift out the filter and check the color of the frame: Blue colored = Washable exhaust filter Green colored = Non washable exhaust filter (it must be replaced by a new one) cn tw . Ind thai viet Replacing the motor filter thai When the filter has been replaced, the filter lid can be pushed back until the two buttons click in. If the filter lid comes loose, restore by positioning the two hinges at the bottom and push the filter lid back until both delete of the two buttons click in. 14 Cleaning the nozzle Disconnect the nozzle from the tube. If the wheels are stuck, clean them by removing the wheel cap (only at the AeroPro nozzle) with a small screwdriver. Cleaning the motorized nozzle Always disconnect the nozzle before cleaning it !Pull out the brush roll and remove entangled threads by snipping them away with scissors. If the wheels are stuck, remove them carefully by using a small screwdriver. Cleaning the Turbo nozzle (certain models only) ( ) 15 eng kor Disconnect the nozzle from the vacuum cleaner tube and remove entangled threads, etc. Ind thai viet Changing battery in remote handle thai Change battery when the light indicator is not responding when pressing any button. Batteries must be removed from the appliance before it is scrapped and are to be disposed of safely. Remote handle with motorized nozzle system DOES NOT have any batteries or light indicator, so DO NOT try to open the motorized handle. [. . . ] If the cord is damaged, it must be replaced only by an authorized Electrolux service centre in order to avoid a hazard. Damage to the vacuum cleaner's cord is not covered by the warranty. all servicing and repairs must be performed by an authorized Electrolux service centre. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG-ELECTROLUX ZUSG3901




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG-ELECTROLUX ZUSG3901 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.