User manual AEG-ELECTROLUX ZUSG3000

[. . . ] All service and repairs must be carried out by an authorised Electrolux service centre. Then open the front cover on the machine and check that the dust bag, s-bag®, and the motor filter are in place. [. . . ] Hard floors and carpets: The floor nozzle (1) motorised floor nozzle (2) recognise the surface that is being vacuumed. Using the motorised floor nozzle* The motorised floor nozzle is ideal for both hard floors and carpets. The motorised floor nozzle receives its low voltage electrical feed via the telescopic tube and hose, and no extra connection is required. As soon as you lift the motorised floor nozzle the brushroll stops automatically, and the light goes out. NB: Do not use the motorised nozzle on rugs with long fringes or a pile depth exceeding 15 mm. In order to avoid damage to the carpet, do not let the nozzle stand still while the brushroll is rotating. Do not run over electric cables and turn off the vacuum cleaner immediately after use. How to use the telescopic tube Assemble the hard floor nozzle on the telescopic tube so that the catch clicks shut. extend or shorten the telescopic tube by pushing the locking button in the direction of the nozzle and simultaneously adjusting the length of the telescopic tube. The dust bag, s-bag® must be replaced latest when the indicator window is completely red. this automatically seals the s-bag® and prevents dust leaking out. Insert a new s-bag® by pushing the cardboard right into the end of the groove in the insert. attach the insert by placing it on the back pegs in the bag compartment. Replace the s-bag® even if it is not full (it could be obstructed). [. . . ] Electrolux decline all responsibility for all damages arising from any improper use of the appliance or in cases of tampering with the appliance. Com If you have any comments on the cleaner or the Instructions for Use booklet please e-mail us at: floorcare@electrolux. [. . . ]