User manual AEG-ELECTROLUX X 66453 MVO

[. . . ] EN - RECOMMENDATIONS AND SUGGESTIONS - The Instructions for Use apply to several versions of this appliance. Accordingly, you may ¿nd descriptions of individual features that do not apply to your speci¿c appliance. [. . . ] - Activated charcoal ¿lter W These ¿lters are not washable and cannot be regenerated, and must be replaced approximately every 4 months of operation, or more frequently with heavy usage. The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city of¿ce, your household waste disposal service or the shop where you purchased the product. Connect the hood to the mains through a two-pole switch having a contact gap of at least 3 mm. Ty Product Components 11 Hood Body, complete with: Controls, Light, Blower, Filters 81 Directional Air Outlet grille 91 Reducer Flange ø 150-120 mm 10 1 Dumper 16 1 Filter cover Ref. As a first step, proceed with the following drawings: · A vertical line up to the ceiling or up to the upper limit, at the centre of the area in which the hood is to be fitted; · A horizontal line at a minimum 1004 mm above the cooker top. Repeat this operation on the other side, checking that the two marks are levelled. Mark a reference point (2) as indicated at 210 mm from the vertical reference line and 482 mm above the cooker top. Repeat this operation on the other side, checking that the two marks are levelled. 1 on the wall, about 1-2 mm from the ceiling or from the upper limit, aligning the centre (notch) with the vertical reference line. [. . . ] If pressed and held for 5 seconds with the hood and lightturned off and no alarm, do: Enables the Remote control. 2 Flashes Led buttom C + B 1 Flash Led buttom C + B After 100 hours operation the Led lights up continuously to indicate saturation of the Metal Grease Filters. [. . . ]