User manual AEG-ELECTROLUX SZ91203-5I

[. . . ] Before placing your new refrigerator/freezer into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. These operating instructions are for use with several technically comparable models with varying accessories. Notes which are important for your safety or for the proper functioning of the appliance are stressed with a warning triangle and/ or with signal words (Warning! [. . . ] Your appliance is equipped with a charcoal filter "AIR FILTER" in the rear wall of the fridge compartment. The filter purifies the air from unwanted odours in the fridge and LONGFRESH compartment meaning that the storage quality will be further improved. The filter should be placed behind the flap before the appliance is turned on. The charcoal filter is then mounted in the slot found in the back of the cover (2). The filter should be handled carefully so fragments do not loosen from the surface. Changing the charcoal filter To maintain the best performance the carbon filter should be changed every year. The filter is placed behind the cover and can be reached by pulling the cover outward (1). Standby time The oil for automatic lubrication contained in the compressor may flow into the refrigeration circuit if the appliance is transported in an inclined position. To allow the oil to flow back into the compressor, wait approximately 1 hour before placing the appliance in operation. With each further press of one of the two buttons, the DESIRED temperature is adjusted by 1°C. Note: From a food safety point of view, +5°C for the refrigerator compartment should be considered cold enough as a storage temperature. Once the required temperature has been set, after a short period (approx. ) the temperature display will change and again indicate the current ACTUAL temperature inside the fridge. When the setting is changed, the compressor does not start immediately if automatic defrosting is currently taking place. Goods to be refrigerated can be loaded immediately after switching on, because the storage temperature in the refrigerator is quickly reached. This quickly cools food stuffs and ensures optimal distribution of the temperature between the fridge and the LONGFRESH 0°C compartment. This results in the fan operating at different speeds for different lengths of time. The TURBO COOLMATIC function is suited for quick cooling of large quantities of goods in the refrigerator, e. The TURBO COOLMATIC function is ended automatically after a period of 6 hours. The originally selected DESIRED temperature is again valid and the compartment will return to. The TURBO COOLMATIC function can be ended manually at any time by pressing the TURBO COOLMATIC button again. Note: The appliance cannot be switched on or off if unplugged, or if there is no power being supplied to it. [. . . ] To switch off, press the ON/OFF button until the mains power light extinguishes. To change the light bulb, press on the rear hook and at the same time slide the light bulb cover in the direction indicated by the arrow. If you cannot find the remedy for a malfunction in these operating instructions, please contact your dealer or our customer service department. Addresses and telephone numbers are listed in the accompanying booklet "Guarantee Conditions/Customer Service Locations". [. . . ]