User manual AEG-ELECTROLUX STEP 100X

[. . . ] SAFETY INSTRUCTIONS Please pay attention to the safety instructions in the attached leaflet! [. . . ] Dust that arises when working on wood or using the tool on industrial material can be dangerous to health. Plunge cuts without pre­drilling a hole are possible with soft materials (wood, light building materials for walls). Harder materials (metals) must first be drilled with a hole corresponding to the size of the saw blade. SPECIFIED CONDITIONS OF USE This jig saw can cut wood, plastic and metal; it can cut straight lines, bevels, curves, and internal cut­outs. EC-DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents. EN 50144, EN 55014­1, EN 55014­2, EN 61000­3­2, EN 61000­3­3, in accordance with the regulations 98/37/EC, 89/336/EEC MAINS CONNECTION Connect only to single-phase a. It is also possible to connect to sockets without an earthing contact as the design conforms to safety class II. MAINTENANCE The ventilation slots of the machine must be kept clear at all times. [. . . ] NÄTANSLUTNING Får endast anslutas till 1-fas växelström och till den spänning som anges på dataskylten. [. . . ]