User manual AEG-ELECTROLUX LAVAMAT 75470 FL

[. . . ] L 75270 FL L 75470 FL L 75670 FL WASHING MACHINE USER MANUAL 2 CONTENTS 4 6 7 8 8 9 12 15 15 15 16 17 18 20 22 27 30 SAFETY INFORMATION ENVIRONMENT CONCERNS TECHNICAL INFORMATION PRODUCT DESCRIPTION ACCESSORIES CONTROL PANEL PROGRAMMES BEFORE FIRST USE USING THE APPLIANCE LOADING THE LAUNDRY FILLING THE DETERGENT AND ADDITIVES SETTING AND STARTING A PROGRAMME AT THE END OF THE PROGRAMME HELPFUL HINTS AND TIPS CARE AND CLEANING TROUBLESHOOTING INSTALLATION SERVICE When contacting Service, ensure that you have the following data available. Model PNC Serial Number The following symbols are used in this user manual: Warning - Important Safety information. General information and tips Environmental information Subject to change without notice ENGLISH 3 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler ­ features you might not find on ordinary appliances. [. . . ] Set and start the correct programme for the type of laundry and soil. LOADING THE LAUNDRY 1. There is a risk of water leakage or damage to the laundry. 16 FILLING THE DETERGENT AND ADDITIVES The detergent compartment for the prewash phase and the soak programme. Add the detergent for prewash and soak before the start of the programme. If you use a liquid detergent, put it immediately before you start the programme. Put the product in the compartment and set the stain function before you start the programme. Flap for powder or liquid detergent Turn it (up or down) in the correct position to use powder or liquid detergent. Always obey the instructions that you find on the packaging of the detergent products. Check the position of the flap 1. Press the lever down to remove the dispenser. ENGLISH 17 3. To use powder detergent, turn the flap up. 4. To use liquid detergent, turn the flap down. With the flap in the position DOWN: ­ Do not use gelatinous or thick liquid detergents. ­ Do not put more liquid detergent than the limit showed in the flap. Make sure that the flap does not cause a blockage when you close the drawer. SETTING AND STARTING A PROGRAMME 1. To change the temperature and/or the spin speed, press the related buttons. The indicator of the set function comes on or the display shows the related symbol. Press button 1 to cancel the programme and to deactivate the appliance. The appliance does not drain the water. 18 CHANGE A FUNCTION You can change only some functions before they operate. The programme starts. OPEN THE DOOR While a programme or the delay start operates, the appliance door is locked. If the temperature and level of the water in the drum are too high, the door lock symbol stays on and you cannot open the door. If you deactivate the appliance, it is necessary to set the programme again. SET THE DELAY START 1. Press button 5 again and again until the display shows the number of minutes or hours. Press button 4 , the appliance starts the countdown of the delay start. Before you press button 4 to start the appliance, you can cancel or change the set of the delay start. You cannot set the delay start with the Steam programme. CANCEL THE DELAY START 1. [. . . ] If the problem occurs again, contact the service centre. 30 INSTALLATION UNPACKING 1. Remove the polystyrene packaging materials. 4. Remove the internal film. 5. Open the door. Remove the polystyrene piece from the door seal and all the items from the drum. ENGLISH 31 6. Put the front piece on the floor behind the appliance. Remove the power supply cable and the drain hose from the hose holders. 10. [. . . ]