User manual AEG-ELECTROLUX LAVAMAT 70260 TL

[. . . ] L 70260 TL WASHING MACHINE USER MANUAL 2 CONTENTS 4 5 6 6 7 7 11 14 14 14 14 15 16 16 18 21 23 SAFETY INFORMATION ENVIRONMENT CONCERNS TECHNICAL INFORMATION PRODUCT DESCRIPTION ACCESSORIES CONTROL PANEL WASHING PROGRAMMES BEFORE FIRST USE USING THE APPLIANCE LOADING THE LAUNDRY USING THE DETERGENT AND ADDITIVES SETTING AND STARTING A PROGRAMME AT THE END OF PROGRAMME HELPFUL HINTS AND TIPS CARE AND CLEANING TROUBLESHOOTING INSTALLATION SERVICE When contacting Service, ensure that you have the following data available. Model PNC Serial Number The following symbols are used in this user manual: Warning - Important Safety information. General information and tips Environmental information Subject to change without notice ENGLISH 3 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler ­ features you might not find on ordinary appliances. [. . . ] The time of the washing programme is extended. CONSUMPTION VALUES Programme1) Cottons 90°C Cottons + Prewash 90°C Extra silent 90°C Synthetics 60°C Synthetics + Prewash 60°C Easy iron 60°C Delicates 40°C Wool / Silk 40°C Spin / Drain Rinse Curtains 40°C Jeans 60°C Quick Intensive 60°C 20 min. 3 kg 30°C Super eco Economy 90°C Programmes for energy saving Economy 60°C3) Economy 40°C3) 1. 02 0. 70 52 55 Energy consumption (KWh)2) 2. 00 2. 20 2. 00 0. 85 1. 10 0. 50 0. 50 0. 50 0. 05 0. 10 0. 60 0. 90 0. 95 0. 35 0. 15 1. 80 Water consumption (litre)2) 55 65 90 44 50 55 48 50 / 35 60 55 45 50 38 55 The cotton 60 °C economy and cotton 40 °C economy are the standard cotton programmes for normally soiled cotton laundry. They are suitable to clean normally soiled cotton laundry and they are the most efficient programmes in terms of combined energy and water consumption for washing that type of cotton laundry. The actual water temperature may differ from the declared cycle temperature. 1) Refer to the display for the programme time. It can vary depending on the quantity and the type of laundry, on the temperature of the water supply and on the ambient temperature. It agrees with EN60456. 14 BEFORE FIRST USE Put a small quantity of detergent in the main wash compartment of the detergent dispenser. Set and start a programme for cotton at the highest temperature without laundry. This removes all possible dirt from the drum and the tub. USING THE APPLIANCE 1. Set and start the correct programme for the type of laundry and soil. LOADING THE LAUNDRY 3. Before you close the lid of your appliance, make sure that you close the drum correctly. A 1. The drum opens automatically. USING THE DETERGENT AND ADDITIVES The detergent compartment for the prewash phase and the soak programme. The detergent compartment for the washing phase. ENGLISH 15 Liquid additives compartment (fabric conditioner, starch). Always obey the instructions that you find on the packaging of the detergent products. SETTING AND STARTING A PROGRAMME 1. To change the temperature and/or the spin speed, press the related buttons. The indicator of the set function comes on or the display shows the related symbol. Press button 5 again and again until the display shows the number of minutes or hours. Press button 4 , the appliance starts the countdown of the delay start. Before you press button 4 to start the appliance, you can cancel or change the set of the delay start. You cannot set the delay start with the Steam programme. INTERRUPT A PROGRAMME 1. Press button 1 to cancel the programme and to deactivate the appliance. The appliance does not drain the water. OPEN THE LID While a programme or the delay start operates, the lid is locked. Open the lid. CHANGE A FUNCTION You can change only some functions before they operate. [. . . ] The washing results are not satisfactory. Possible cause The end of the drain hose is too low. Too much laundry load. Possible solution Make sure that the drain hose is in the correct position. If the display shows other alarm codes, contact the service centre. After the check, activate the appliance. If the problem occurs again, contact the service centre. INSTALLATION UNPACKING 1. [. . . ]