User manual AEG-ELECTROLUX FAV50EW0P

[. . . ] ⷠThe first time you use the appliance, make sure that there is no leakage. Do not let persons, children included, with reduced physical sensory, reduced mental functions or lack of experience and knowledge use the appliance. They must have supervision or instruction for the operation of the appliance by a person who is responsible for their safety. [. . . ] Be sure that these tablets are applicable to the water hardness in your area. The dishwasher salt keeps the water softener clean and in good conditions. It makes sure that the water softener uses the correct quantity of dishwasher salt and water. The rinse aid, during the last rinsing phase, helps to dry the dishes without streaks and stains. Fill the rinse aid dispenser (A), no more than the mark 'max'. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam. You can turn the selector of the released quantity (B) between position 1 (lowest quantity) and position 4 (highest quantity). ⷠDo not put in the appliance items that can absorb water (sponges, household cloths). ⷠPut hollow items (cups, glasses and pans) with the opening down. ⷠMake sure that cutlery and dishes do not bond together. ⷠMake sure that the spray arms can move freely before you start a programme. Refer to the supplied leaflet with examples of the load of the baskets. ⷠOnly use the appliance to wash items that are dishwasher-safe. ⷠDo not put in the appliance items made of wood, horn, aluminium, pewter and copper. If the programme has a prewash phase, put a small quantity of detergent on the inner part of the appliance door. Detergent tablets do not fully dissolve with short programmes and detergent residues can stay on the dishes. The appliance is in setting mode when, after the activation: · If the control panel shows other conditions, press and hold Delay and Start at the same time until the appliance is in setting mode. Starting a programme without delay start Press Program again and again until the indicator of the programme that you want to set comes on. [. . . ] Make sure that the dimensions of the recess agree with the dimensions in the figure. Loosen or tighten the adjustable feet for a correct level of the appliance. This prevents that waste water from the sink goes back to the appliance. [. . . ]