User manual AEG-ELECTROLUX F34030IM0

[. . . ] ⷠObey the safety instructions from the detergent manufacturer to prevent burns to eyes, mouth and throat. ⷠDo not keep the appliance door open without supervision. Do not use the appliance for other uses to prevent injury to persons and damage to property. ⷠOnly use the appliance to clean accessories that are applicable for dishwashers. [. . . ] ⷠIf the detergent gets into the eyes, contact immediately a physician and clean the eyes with water. ⷠKeep dishwasher detergents in a safe area and out of children touch. ⷠDo not keep the appliance door open when there is detergent in the detergent dispenser. ⷠFill the detergent dispenser only before you start a washing programme. On/off indicator light Programme marker Indicator lights Delay start button Start/cancel button Programme knob Indicator lights It comes on when the washing phase or the rinsing phase operates. After you fill the container, the salt indicator light can stay on for some hours. This does not have an unwanted effect on the operation of the appliance. 1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while a washing programme operates. The programme marker on the programme knob must agree with one of the washing programmes on the control panel. To switch off the appliance: ­ Turn the programme knob clockwise or counterclockwise until the programme marker agrees with the on/off indicator light. Use this button to delay the start of the washing programme with an interval of 3 hours. Be sure that the set level of the water softener agrees with the water hardness in your area. Adjust the level of the water softener if this does not agree with the water hardness in your area. Contact your local water authority to know the water hardness in your area. Turn the programme knob clockwise until the programme marker agrees with the first available washing programme on the control panel. Release the start/cancel button when the on/off and the start/cancel indicator lights start to flash. Each time you press the start/ cancel button, the adjustment goes to the subsequent level. If the water softener is set electronically to the level 1, the salt indicator light stays off. Fill the salt container with 1 litre of water (only for the first time you fill with salt). It is correct that water comes out from the salt container when you fill it with salt. To help the environment, do not use more than the correct quantity of detergent. follow the detergent manufacturer recommendations on the detergent packaging. [. . . ] Make sure that the filters are clean and correctly assembled and installed. You have set a washing programme without drying phase or with a decreased drying phase. Solar panels, photovoltaic panels and aeolian), use a hot water supply to decrease energy consumption. The symbol on the product or on its packaging indicates that this product may not be treated as household waste. [. . . ]