User manual AEG-ELECTROLUX EXH09HX

[. . . ] Pulling and misuse of the power supply cord can result in damage to the unit and cause electrical shock. Be careful not to expose your body directly to the outlet air for a long time. When using the Heatpump for infants, children, elderly, bedridden, or disabled people make sure the room temperature is suitable for those in the room. Inserting objects can result in injury due to the high speed rotation of internal fans. [. . . ] The Heatpump will operate at "Extra HIGH" fan speed for 5 minutes, and then shift to "HIGH" fan speed. The vertical adjustment louvre will be set automatically to a diagonally lower direction, though it can be changed if necessary. You can not set the temperature or fan speed during the TURBO operation. Plasmacluster operation The Plasmacluster Ion generator inside the Heatpump will release positive and negative plasmacluster ions into the room. Approximately the same number of positive and negative ions released into the air will reduce some airborne mold. Use of the PLASMACLUSTER operation will be memorized, and it will be activated the next time you turn on the air conditioner. To perform the PLASMACLUSTER operation without accompanying heat, cool or dry mode, press the PLASMACLUSTER button while the unit is not operating. The mode symbol of the remote control will go off and the fan speed can not be set AUTO. Self clean operation SELF CLEAN operation will provide effect to reduce the growth mold fungus, and to dry inside of the Heatpump unit with Plasmacluster ions. ­ The red OPERATION lamp, the green CLEAN lamp and the blue PLASMACLUSTER lamp on the unit will light up. ­ The red OPERATION lamp, the green CLEAN lamp and the blue PLASMACLUSTER lamp on the unit will turn off. You cannot set the temperature, fan speed, air flow direction or timer setting during the SELF CLEAN operation. One-hour off timer When the ONE-HOUR OFF TIMER is set, the unit will automatically turn off after one hour. ­ The red OPERATION lamp and the orange TIMER lamp on the unit will turn off. If the ONE-HOUR OFF TIMER is set while the unit is not operating, the unit will operate for an hour at the formerly set condition. If you wish to operate the unit for another hour before the ONE-HOUR OFF TIMER is activated, press the ONE-HOUR OFF TIMER button again during operation. If TIMER ON and/or TIMER OFF are set, TIMER CANCEL (SET/C) button cancels every setting. Point the remote control at the receiver window on the unit and press the TIMER SET (SET/C) button. Tips about timer off operation When the TIMER OFF mode is set, the temperature setting is automatically adjusted to prevent the room from becoming excessively hot or too cold while you sleep. (Auto Sleep function) The Auto Sleep function will not activate during the AUTO mode. heat mode: · One hour after the timer operation begins, the temperature setting drops 3°C lower than the original temperature setting. cool/dry mode: · One hour after the time operation begins, the temperature setting rises 1 °C higher than the original temperature setting. [. . . ] For more detailed information about recycling of this product, please contact your local council, Your household waste disposal service or the shop where you purchased the product. If you want to dispose of this equipment, please do not use the ordinary dust bin!Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment. Following the implementation by member states, private households within the EU states may return their used electrical and electronic equipment to designated collection facilities free of charge1). [. . . ]