User manual AEG-ELECTROLUX ESL6210LO

[. . . ] Children and vulnerable persons safety · Do not let persons, children included, with reduced physical sensory, reduced mental functions or lack of experience and knowledge to use the appliance. They must have supervision or instruction for the operation of the appliance by a person who is responsible for their safety. · Keep children and pets away from the appliance when the door is open. General safety · Do not change the specifications of this appliance. [. . . ] Refer to 'Multitab function'. Rinse aid 1) Multitab 1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while a washing programme operates. Display The display shows: · The electronic adjustment of the level of the water softener · The activation and deactivation of the rinse aid dispenser (only with the multitab function on) · The time of the washing programme · The remaining time to the end of the washing programme · The end of a washing programme (the display shows a zero) · The time of the delay start · The alarm codes · The activation and deactivation of the acoustic signals. Delay start button Use this button to delay the start of the washing programme with an interval be- 6 electrolux tween 1 and 24 hours. Programme buttons Press one of these buttons to set a washing programme. Function buttons Use the function buttons for these operations: · To adjust electronically the level of the water softener. · To activate/deactivate the rinse aid dispenser when the multitab function is on. · To cancel the washing programme in progress or a delay start in progress. Setting mode The appliance must be in setting mode for these operations: · To set and start a washing programme. · To activate or deactivate the rinse aid dispenser (only with the multitab function on). The appliance is in setting mode when: · All the programme indicators come on. The appliance is not in setting mode when: · Only one programme indicator comes on. · The display shows the time of the washing programme or of the delay start. ­ It is necessary to cancel the programme or the delay start to go back to the setting mode. You cannot activate the multitab function when the programme operates. Press and hold function buttons D and E until the multitab indicator light comes on. To deactivate the multitab function and use separately detergent, salt and rinse aid: 1. Press and hold function buttons D and E until the multitab indicator light goes off. Adjust the rinse aid dosage. LOADING CUTLERY AND DISHES Refer to the leaflet 'Examples of RealLife loads'. Hints and tips · Do not put in the appliance items that can absorb water (sponges, household cloths). 10 electrolux · Remove the remaining food from the items. · Put hollow items (cups, glasses and pans) with the opening down. · Make sure that water does not collect in containers or in bowls. · Make sure that the glasses do not touch other glasses. · Put small items in the cutlery basket. · Mix the spoons with other cutlery to prevent them to bond together. · When you put the items in the baskets, make sure that the water can touch all surfaces. [. . . ] Do not use abrasive products, abrasive cleaning pads or solvents (acetone). electrolux 13 WHAT TO DO IF. . . The appliance does not start or stops during operation. Malfunction The appliance does not fill with water. Fault code The display shows First try to find a solution to the problem (refer to the chart). If not, contact the service centre. Possible cause The water tap is blocked or is furred with limescale. Possible solution Clean the water tap. Contact your local water authority. [. . . ]