User manual AEG-ELECTROLUX ESF6700ROK

[. . . ] correct use · This dishwasher is only intended for washing household utensils suitable for machine washing. Knives and other items with sharp points must be loaded in the cutlery basket with their points down or placed in a horizontal position in the upper basket. Avoid opening the door whilst the appliance is in operation, hot steam may escape. ⷠDo not take any dishes out of the dishwasher before the end of the washing cycle. [. . . ] Service dishes and large lids should be arranged around the edge of the basket, ensuring that the spray arms can turn freely. The rows of prongs in the lower basket can lie flat to allow you to load pots, pans and bowls. Forks and spoons should be placed in the removable cutlery basket with the handles facing downwards and the knives with their handles facing upwards. If the size and dimensions of the cutlery do not allow the use of the grids, they can be easily hidden. The cutlery basket is in two parts which can be separated to give greater loading flexibility. To separate the two parts, slide them horizontally in opposite directions and pull them apart. If the handles protrude from the bottom of the basket, obstructing the lower spray arm, load the cutlery with the handles facing upwards. To make loading of the cutlery basket easier, lower the cutlery basket handle. Arrange items on and underneath the cup racks so that water can reach all surfaces. The central rows of prongs can be easily lowered to improve loading flexibility. The mini cutlery basket must only be placed in the front part of the upper basket, on the left or on the right side. Close the door; the countdown will continue from the point at which it was interrupted. Close the door; the programme will start from the point at which it was interrupted. cancel a delay start or a washing programme in progress · Simultaneously press and hold the two function buttons B and C until all the programme lights come on. ⷠProgramme-progress-display is fully on with a blue light. If a new washing programme is to be selected, check that there is detergent in the detergent dispenser. Leave the dishwasher door ajar for a few minutes before removing the dishes. The dishes should therefore be allowed to cool down before removing from the appliance. ⷠEmpty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one. ⷠWater may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes. When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off. Programme Degree of soil Type of load Programme description Prewash Main wash Crockery, cutlery, 2 intermediate rinses pots and pans Final rinse Drying Prewash Main wash Crockery, cutlery, 1 or 2 intermediate rinses pots and pans Final rinse Drying Crockery and cutlery Crockery and cutlery Main wash Final rinse Prewash Main wash 1 intermediate rinse Final rinse Drying Main wash 1 intermediate rinse Final rinse Drying 1) During the 'Auto' washing programme the level of soiling on the dishes is determined by how cloudy the water is. [. . . ] For making the connection itself, the coupling nut fitted to the appliance water inlet hose is designed to screw onto a 3/4" thread spout or to a purpose made quick-coupling tap such as the Press-block. The water pressure must be within the limits given in the 'Technical data'. Your local Water Authority will advise you on the average mains pressure in your area. The water inlet hose must not be kinked, crushed, or entangled when it is being connected. [. . . ]