User manual AEG-ELECTROLUX ESF6630ROX

[. . . ] ESF 6630ROW ESF 6630ROK ESF 6630ROX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time. [. . . ] 2) Do not use salt at this level. You must adjust the water softener manually and electronically. Manual adjustment Turn the water hardness dial to the position 1 or 2. Electronic adjustment 1. Press and hold, at the same time, Program and TimeSaver for a few seconds. Press and hold, at the same time, Delay and Option until the indicators , and start to flash. Press the on/off button to deactivate the appliance and to confirm the setting. • The indicators • The indicator and go off. 12 www. electrolux. com 6. 2 Filling the salt container 1. To prevent it, after you fill the salt container, start a programme. 6. 3 Filling the rinse aid dispenser A B 1. 2. M AX + 4 3 2 3. - 4. Press the release button (D) to open the lid (C). Fill the rinse aid dispenser (A), no more than the mark 'max'. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam. You can turn the selector of the released quantity (B) between position 1 (lowest quantity) and position 4 (highest quantity). 1 C D 7. • If the rinse aid indicator is on, fill the rinse aid dispenser. Set and start the correct programme for the type of load and the degree of soil. ENGLISH 13 7. 1 Using the detergent A B 1. If the programme has a prewash phase, put a small quantity of detergent on the inner part of the appliance door. Make sure that the release button locks into position. 7. 2 Setting and starting a programme The Auto Off function To decrease the energy consumption, this function automatically deactivates the appliance a few minutes after: • You have not closed the door to start the programme. • The programme is completed. Starting a programme without delay start 1. • If you want to start the last set programme, close the appliance door. • If you want to set the MyFavourite programme, press and hold Program until the indicators that are related to the MyFavourite programme and options come on. • If you want to set a different programme, press Program again and again until the indicator of the programme you want to set comes on. • The programme duration starts to decrease with steps of 1 minute. Starting a programme with delay start 1. Press Delay again and again until the display shows the delay time you want to set (from 1 to 24 hours). When the countdown is completed, the programme starts. Opening the door while the appliance operates If you open the door, the appliance stops. When you close the door, the appliance continues from the point of interruption. Cancelling the delay start while the countdown operates 1. Press and hold, at the same time, Program and TimeSaver until the duration of the set programme comes on. [. . . ] With some problems, the display shows an alarm code: • - The appliance does not fill with water. Deactivate the appliance before you do the checks. Problem You cannot activate the appliance. Possible solution Make sure that the mains plug is connected to the mains socket. Make sure that there is not a damaged fuse in the fuse box. ENGLISH 17 Problem The programme does not start. Possible solution Make sure that the appliance door is closed. If the delay start is set, cancel the setting or wait for the end of the countdown. The appliance does not fill with water. Make sure that the water tap is open. [. . . ]