User manual AEG-ELECTROLUX ESF65053W

[. . . ] Thinking of you. Share more of our thinking at www. electrolux. com Contents Safety information Product description Control panel Use of the appliance Setting the water softener Use of dishwasher salt Use of rinse aid Loading cutlery and dishes Use of detergent Multitab function 2 3 4 5 5 6 7 8 10 11 Select and start a washing programme Washing programmes Care and cleaning What to do if. . . Technical data Installation Water connection Electrical connection Environment concerns 11 13 13 15 16 16 17 19 19 Subject to change without notice Safety information For your safety and correct operation of the appliance, read this manual carefully before installation and use. Always keep these instructions with the appliance even if you move or sell it. Users must fully know the operation and safety features of the appliance. [. . . ] Some detergent tablets do not have the best cleaning results during short washing programmes. Use long washing programmes when you use detergent tablets to fully remove the detergent. Multitab function The multitab function is for combi detergent tablets. These tablets contain agents such as detergent, rinse aid and dishwasher salt. Do a check if these tablets are applicable for the local water hardness. When you set the multitab function, it stays on until you deactivate it. The multitab function stops automatically the flow of rinse aid and salt. The rinse aid indicator light and salt indicator light are deactivated. Activate or deactivate the multitab function before the start of a washing programme. You cannot activate or deactivate the multitab function when the programme operates. To activate the multitab function: · Press the multitab button. To deactivate the multitab function: · Press the multitab button. · You can only activate or deactivate the rinse aid dispenser when the multitab function is activated. To activate/deactivate the rinse aid dispenser: The appliance must be switched off. Turn the programme knob counterclockwise until the programme marker agrees with the first washing programme on the control panel. Release the start/cancel button when the display shows the water hardness level. Turn the programme knob counterclockwise until the programme marker agrees with the second washing programme on the control panel. The digital display shows the current setting for the rinse aid dispenser. Rinse aid dispenser deactivated Rinse aid dispenser activated 5. Adjust the rinse aid dosage. Select and start a washing programme Do these steps to set and start a washing programme: 1. Refer to the chapter 'Washing programmes'. 12 electrolux ­ The phase indicator light or lights for the washing programme come on. ­ When the programme starts, only the indicator light of the phase in progress stays on. Cancelling a washing programme · Press and hold the start/cancel button. ­ In the digital display the time duration of the programme flashes. [. . . ] The water inlet hose is under pressure only while the water is running. If there is a leak in the water inlet hose, the safety valve interrupts the running water. Be careful when you connect the water inlet hose: · Do not put the water inlet hose or the safety valve in water. · If the water inlet hose or the safety valve is damaged, immediately disconnect the mains plug from the mains socket. [. . . ]