User manual AEG-ELECTROLUX EFC9566X/S

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AEG-ELECTROLUX EFC9566X/S. We hope that this AEG-ELECTROLUX EFC9566X/S user guide will be useful to you.


AEG-ELECTROLUX EFC9566X/S : Download the complete user guide (777 Ko)

Manual abstract: user guide AEG-ELECTROLUX EFC9566X/S

Detailed instructions for use are in the User's Guide.

[. . . ] Failure to follow the instructions as concerns hood and filter cleaning will lead to the risk of fires. Do not use or leave the hood without the lamp correctly mounted because of the possible risk of electric shocks. We decline any responsibility for any problems, damage or fires caused to the appliance as the result of the non-observance of the instructions included in this manual. This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). [. . . ] Best results are obtained by using a low speed for normal conditions and a high speed when odours are more concentrated. The hood should be left on after cooking for about 15 minutes or until all the odours have disappeared. The hood can also be commanded from the control panel or the remote control. (the remote control is a special accessory and is ordered separately). Hob light: Press the knob briefly to select the various options, in the following sequence: Full power lighting - Soft lighting - No lighting. Room lighting: Press and hold the knob to switch the room lighting on and off. To select an available suction speed (power) level: Turn the knob in a clockwise direction to increase the suction speed (power); turn it in an anticlockwise direction to decrease the power until the hob is switched off. The cooker hood is fitted with an LED (L1) which indicates the suction speed (power) selected by displaying different colours: · Fixed green light: green Cooker hood operating at power level 1 (minimum). Fixed orange light: Cooker hood operating at power level 2 (medium). Fixed red light: red Cooker hood operating at power level 3 (maximum). Flashing red light: red Cooker hood operating at an intensive power level (for a duration of 5 minutes, after which the appliance automatically selects power level 3). With normal use the filter should be cleaned every second month (when using the hood 2, 5 hours per day, on avarage). Wash the filter separately so that no food parts gets stuck on the filter and later causes bad odours. To reactivate the charcoal, the filter should be dried in an oven for 10 minutes with a maximum temperature of 100º C. After approximately three years of use, the charcoal filter should be replaced with a new one, as the odour reduction capacity will be reduced. The metal wires are included in the carbon filter packing and not on the hood · Always specify the hood model code number and serial number when ordering replacement filters. This information is shown on the rating plate located on the inside of the unit. The charcoal filter can be ordered from your local Service Force Centre. The manufacturer declines all responsibility for any damage to the motor or any fire damage linked to inappropriate maintenance or failure to observe the above safety recommendations. Prior to touching the light bulbs ensure are ensure they are cooled down. If the light does not come on, make sure the bulb has been inserted in correctly before contacting your local Service Force Centre. Clean the outside of the hood using a damp cloth and a solution of water and mild washing up liquid. [. . . ] Warnings Safety warnings for the electrician The mains power supply must correspond to the rating indicated on the plate situated inside the hood. If provided with a plug connect the hood to a socket in compliance with current regulations and positioned in an accessible area. If it not fitted with a plug (direct mains connection) or if the plug is not located in an accessible area apply a bi-polar switch in accordance with standards which assures the complete disconnection of the mains under conditions relating to over-current category III, in accordance with installation instructions. Before re-connecting the hood circuit to the mains supply and checking the efficient function, always check that the mains cable is correctly assembled. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG-ELECTROLUX EFC9566X/S




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG-ELECTROLUX EFC9566X/S will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.