User manual AEG-ELECTROLUX EAT 7100

[. . . ] However the metal parts on the top of the appliance and in the toasting slot will become hot ­ there is a risk of burns!The mains cable is of a special type and is only to be replaced by the Customer Care Department since special tools are required for its replacement. Repairs to this appliance may only be carried out by qualified service engineers. [. . . ] Repairs to this appliance may only be carried out by qualified service engineers. If repairs become necessary, please contact the Customer Care Department or your authorised dealer. ), information that is important for your safety or the correct functioning of the appliance is highlighted. 0 This symbol guides you step by step through the operation of the appliance. Next to this symbol you will find additional information and practical tips on using the appliance. Tips and information about the economical and environmentally friendly use of the appliance are marked with the clover. A B C D E F G H J K L Toasting slot Thermally insulated outer housing Start lever and bread lift Browning control Roll rack for crisping up bread rolls Warm up button with indicator lamp Defrost button with indicator lamp Stop button with indicator lamp Crumb drawer Cord storage (on the underside of the appliance) Rating plate (on the underside of the appliance) If the appliance is used for purposes other than those intended or used incorrectly, no liability can be accepted for any damage that may be caused. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they have been given initial supervision or instruction concerning use of the appliance by a person responsible for their safety. By lifting the start lever (bread lift function) the toasted bread can be lifted sufficiently such that it is easy to remove (Figure 3). Using the rotary knob you can continuously adjust the browning setting from 1-6 as required. If the toast is not browned to your liking, set the adjuster lower or higher, higher for example when toasting rye or dark bread. When toasting only 1 slice and also when toasting bread that is no longer fresh, use a slightly lower browning setting. Due to the nature of the function of the appliance, the roll rack will become hot during toasting, therefore never touch the metal parts. Hold the roll rack by the hand grips and put it onto the toasting slot. Place rolls or other bread for crisping on the rack, turn the browning control to the required browning setting. The electronic toasting time regulator ensures that once a browning setting has been chosen, the results are always the same for the same type of bread. [. . . ] Hold the roll rack by the hand grips and put it onto the toasting slot. Place rolls or other bread for crisping on the rack, turn the browning control to the required browning setting. The electronic toasting time regulator ensures that once a browning setting has been chosen, the results are always the same for the same type of bread. [. . . ]