User manual ADVENT ADV560

[. . . ] This universal remote makes juggling remote controls a thing of the past. You can program your universal remote to operate most models of most brands of infrared, remote-controlled components manufactured after 1990. ) This remote is unusually versatile because it has AUX key(s) that you can program to control almost any video component. This remote is easy to use, easy to program and gives you control at the touch of your fingertips. [. . . ] Move closer and make sure you point the remote at the component (DVD player when programming the DVD key; TV when programming the TV key; satellite or cable box when programming the SAT· If you've used the Direct Entry programming methods to enter the codes for your brand and the unit is still not functioning properly, try one of the Code Search methods. ⷠTo control combo units, like TV/VCRs, TV/DVDs or TV/VCR/DVDs, you must program the individual corresponding component keys to control each part of the combo unit. Once programmed successfully, the TV key controls the TV functions, and the VCR or DVD key controls the VCR or DVD functions, respectively. The codes in this section should be tried first using Direct Code Entry on the TV, DVD, VCR, or AUX key(s). If this is unsuccessful, follow the normal programming methods for both the TV and the DVD or VCR keys. ⷠMake sure the batteries are fresh and are properly installed. Make sure your components are turned on and your TV is set to display the appropriate video source. ⷠYou must put the remote in the correct mode by pressing the corresponding component key (TV, DVD, VCR, AUX, SAT· CBL) so the remote knows which component you want to operate. ⷠIf you're trying to change channels, try pressing the OK key after entering the channel number as this is a requirement of certain models and brands. ⷠThere is a possibility that a programmed code may only be able to control some of your component features (e. To confirm that the component key is programmed with the correct code for maximum functionality, test the component. attempt to control a variety of the component's functions with the remote. If some of the features of your components do not work, try programming the remote with a different code in the list using the Direct Code Entry Method, until you find the code that allows the remote to control the majority of your component's functions. Make sure your components are turned on and your TV is set to display the appropriate video source. ⷠYou may have pressed an invalid key for the mode the remote is in. You must put the remote in the correct mode by pressing the corresponding component key (TV, DVD, VCR, AUX, SAT· CBL) so the remote knows which component you want to operate. ⷠMake sure the batteries are fresh and are properly installed. If the safety tab is removed the tape is write-protected, and you cannot record onto that tape. Make sure your components are turned on and your TV is set to display the appropriate video source. ⷠYou must put the remote in the correct mode by pressing the corresponding component key (TV, DVD, VCR, AUX, SAT· CBL) so the remote knows which component you want to operate. ⷠRemove any obstacles between the remote and the component. Make sure you have connected your component to your TV properly and selected the correct input. [. . . ] Press the GUIDE key to access the program guide for your satellite receiver or cable box. The LED inidicator light blinks to indicate you are in the Guide mode. Use the VOL+/- and/or CH+/- keys to navigate through the on-screen menu system. To make a selection from the on-screen menu, press the MENU or OK key to select the highlighted item. [. . . ]