User manual ADVANCE MPP-1000

[. . . ] Before any transportation, your product must be packed correctly in order to avoid any damage. RETAIN INSTRUCTIONS The safety anil operating instructions should be retained for future use. HEED WARNINGS All warnings on the appliance and in the operating instructions should be adhered to. FOLLOW INSTRUCTIONS All operating and use instructions should be followed. [. . . ] POWER LINES An outdoor antenna should be located away from power lines. NON-USE PERIODS The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. OBJECT AND LIQUID ENTRY Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. STANDBY/ON POWER BUTTON Press this button to turn ON your appliance, power is supplied to your unit and it becomes operational, the STANDBY indicator blue lights after few seconds. (The main power switch is located on the back panel and must be ON in order to use STANDBY function). When set to STANDBY the main power is cut-off and the unit is no longer fully operational except for the micro controller. Also on this input, you have the possibility to use others sources with same audio signal output like tuner, tape, MD, etc. L de votre préamplificateur MPP-1000 BALANCED CD INPUT If your cd player has a stereo balanced output, you can connect it on the stereo balanced cd input of your preamplifier MPP-1000. Also, you can use this balanced input with others sources like tuner, DVD, etc. TUNER INPUT Press this button to select the tuner as your listen source. Also on this input, you have the possibility to use others sources with same audio signal output like tuner, tape, MD, etc. BOUTON DE VOLUME VYour amplifier used a rotary type knob to control the 2 channel output sound level (left and right). Turn this volume knob clockwise to increase the ouput sound level and turn this volume knob counterclockwise to decrease the output sound level. Also on this input, you have the possibility to use others sources with same audio signal output like tuner, tape, MD, etc. L de votre préamplificateur MPP-1000 BALANCED AUXILIARY INPUT If your source has a stereo balanced output, you can connect it on the stereo balanced auxiliary input of your preamplifier MPP-1000. Also, you can use this balanced input with others sources like tuner, DVD, etc. MUTE Push this button and the sound will stop, push again and the sound will come back. PHONO INPUT Press this button to select the phono input as your listen source. [. . . ] From trigger output of the preamplifier MPP-1000 to trigger input of Advance Acoustic power amplifiers. PHONO INPUT MM AND MC You can connect your turntable on PHONO MM if you are using a moving magnet cartridge (MM) or on PHONO MC if you are using a moving coil cartridge (MC). Please pay attention that left channel output (L) and right channel output (R) of your turntable must be connected on left channel and right channel of your MPP-1000 preamplifier. POWER CORD /MASTER ON/OFF SWITCH / VOLTAGE SELECTOR Before plugging in the amplifier, its master power switch must be in the OFF position. [. . . ]