User manual ADDONICS ZBW-10LS2EU-N

[. . . ] Enclosure Overview Addonics TECHNOLOGIES Zebra Blu Ray & DVD±R/RW Writer with eSATA and USB interface ZBW-10LS2EU-N Drive Activity LED Eject Button Power LED Rear View Fan Switch USB Port Screw 2 Screw 1 User's Guide Power Connector eSATA Port FCC Warning Statement This equipment has been tested and found to comply with the limits for a class B digital device pursuant to Part 15 of the FCC rules. [. . . ] Connect the power adapter to the power connector located at the back of the enclosure. eSATA connection Note: You should have configured the eSATA host controller on your system before you connect the writer. Once the eSATA host controller is configured, do the following steps below. Plug-in the eSATA cable to the eSATA port on the enclosure and attached the other end to your eSATA host controller. Or USB2. 0 connection Attach the USB cable to the USB port on the enclosure and in your system. 3. Power ON the enclosure using the switch on the back panel. You should see the Green Power LED on the front panel at the bottom right light up. Go to Device Manager to check if your system detects the Blu Ray writer via eSATA connection 4. Blu-ray/DVDROM Drive Blu-ray/ DVDROM Drive Sample driver of an eSATA host controller Technical Support If you need assistance to get your unit functioning properly, please call Addonics Technical Support. Our technical staff will be happy to assist you, but they will need your help to do so. [. . . ] FREE Software Drivers for all Addonics Technologies Products are available 24 hours per day at the World Wide Web Site: www. addonics. com Contact Information via USB2. 0 connection Blu-ray/ DVD-ROM Drive USB Driver Phone: Fax: Email: Internet: 408-573-8580 408-573-8588 http://www. addonics. com/sales/query/ http://www. addonics. com TECHNICAL SUPPORT Phone: 408-453-6212 Hours: 8:30 am - 6:00 pm PST Email: http://www. addonics. com/support/query/ 5. [. . . ]