User manual ADDONICS UFMDU

[. . . ] ADDONICS TECHNOLOGIES Model: UFMDU Note: Make sure that the capacity of the target card is equal or larger than the source card. For example, on the label of the card, it might identify both cards as 8GB but the actual size differs. [. . . ] Verify that the power LEDs of the flash reader light up. Duplicator LED Source and target flash reader LED Power Press ENT button to begin copy. The system will auto-detect the card and show the following info on the LCD. Step 1 Insert the Source card into the source bay. Note: Only one type of source card can inserted on the source bay at a time. Verify that the power LEDs of the flash reader are blinking indicating drive activity. The LCD will show the following info during the copying process: remaining time, completed percentage. The copy speed, capacity and time will vary depending on the source hard disk. Once the copying process is complete the LCD will display the following results. Step 2 Insert the Target card into the target bay. Note: Only one type of target card can inserted on the source bay at a time. II. [. . . ] Contact Information Phone: 408-573-8580 Fax: 408-573-8588 Email: http://www. addonics. com/sales/query/ Internet: http://www. addonics. com TECHNICAL SUPPORT Phone: 408-453-6212 Hours: 8:30 am - 6:00 pm PST Email: http://www. addonics. com/support/query/ [. . . ]