User manual ADDONICS ADSAIDE44 INSTALLATION
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ADDONICS ADSAIDE44. We hope that this ADDONICS ADSAIDE44 user guide will be useful to you.
 |
ADDONICS ADSAIDE44 INSTALLATION: Download the complete user guide (84 Ko) |
Manual abstract: user guide ADDONICS ADSAIDE44INSTALLATION
Detailed instructions for use are in the User's Guide.
[. . . ] [. . . ] The red edge of the ribbon cable needs to line up to pin 1 marker of the 44-pin connector. The other end of the ribbon cable will be connected to your motherboard's 44-pin IDE channel.
Pin 1 Marker
Jumper Settings
Master Note:
Slave
Cable Select
To set the SATA hard drive as a Master Device when connected to an IDE channel, you need to short the top pins located on the converter by placing a jumper. As a Slave Device short the middle pins.
1.
Locate the SATA connector of your 2. 5" SATA drive.
TECHNICAL SUPPORT
15-pin SATA Power & 7-pin Data Connector
Email: Internet:
http://www. addonics. com/sales/ http://www. addonics. com
Technical Support (8:30 am to 6:00 pm PST) Phone: 408 573-8580 Email: http://www. addonics. com/support/ticketid/ [. . . ] [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ADDONICS ADSAIDE44
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ADDONICS ADSAIDE44 will begin.