User manual ACT SMARTLOCK

[. . . ] SmartLock Installation Instructions The SmartLock improves the security of ACTSmart2 installations by allowing the installer to locate the lock control relay inside a secure area. [. . . ] For a Maglock, two fused outputs are required - one fused output for the ACTSmart2 and another for the Smartlock and Maglock. This prevents a short from +12V to 0V on the ACTSmart2 side of the door from deenergising the Maglock. The Data line from the SmartLock to the ACTSmart2 must be less than 30m. Connect the ACTSmart2 and the SmartLock as in the diagram below and power up. For AUX I/O 2 enter followed by the programming code (default code is 9999) and 5211 . Remember to change the other AUX I/O and the Programmable Input from Door Release Button. To set the Programmable Input to Door Contact enter then the programming code and 500 . To set AUX I/O 1 to Door Alarm enter followed by the programming code and 5108 . [. . . ] E-mail: sales@accesscontrol. ie Web: www. accesscontrol. ie 30-00030 OMO RN 5A 5A RO N 1A 125V + 12-24V DC/AC 0V N/O COMM N/C 12-24V DC/AC 0V Push Button Tamper N/O COMM N/C Door Release Button SmartLock Important! [. . . ]