User manual ACT PRO 2000

[. . . ] QUICK PROGRAMMING GUIDE (for typical Standalone System) 1. 4. Changing Operator code. [. . . ] Tel: +353 (0)1 466 2570 UK Lo-Call: 0845 300 5204 Copyright © 2009 Access Control Technology Ltd. (18-00008-00) Ensure that any lost cards are immediately deleted from the system. Ensure that your staff are fully aware of the operation of readers and report any system problems to the Installer immediately . Good Housekeeping. IMPORTANT ACTpro 1000 / 2000 Access Control (Operator Instructions) Operator Menu 1 2 0 3 4 5 6 (This is the default code) 0 User Setup Group Setup System Log Control Door User Tracking Set Date/Time Time Zones Set Holidays Issue Number Change PIN 3 7 Operator Menu 3 0 Enable Disable Assign Names Assign Groups Assign Options Assign PINs Learn Batch Cards One-To-One Card Validity User 1 Disabled User 2 Disabled User 2 Enabled 1 User Setup Menu navigation in User & Group Setup functions When one of the user or group setup functions is invoked, the top line of the display will show the number of the group or user. If a text name has been entered, this will be shown instead. The lower line will show the current setting for the item that is being configured. Pressing the zero key will advance to the next user or group. Group Setup 0 7 0 7 Lock Door Unlock Door Normalise Door Pass Door Aux Output On Aux Output Off 0 7 *On the ACT2000 you will first be prompted to select which door to control. 7 Control Door* Enable Disable Assign Names Access Rights Assign Options Assign PINs System Log User 2 From User 5_ 3 2 7 Pressing the accept key will change the state for the currently displayed user or group, or will allow the displayed information to be changed (for example, editing the name). User 2 To User 27_ 3 As a short cut, on some menus it is possible to use the numeric keys to directly enter a range of users on which the desired changes will be made. The prompts "From User" and "To User" are displayed. Display Log Print Log Filter Log 1 2 3 4 5 6 7 User 27 Enabled 7 On other menus, the numeric keys may be used to jump quickly to a particular user or group number. In this case the prompt "Goto" is displayed. The X key will exit from the current function and return to the previous menu. Changing PIN codes abcABC1 defDEF2 ghiGHI3 jklJKL4 mnoMNO5 pqrPQR6 stuvSTUV7 4 Entering Text Several menus allow text names to be entered for users or groups. When editing text, the numeric keys 1 to 9 are used to enter the required characters. [. . . ] Assuming all is OK, the controller will display "Accepted" - the new PIN is now set. User and Group PINs may be unset (removed) by entering a PIN consisting of all zeros. [. . . ]