User manual ACT ACTWINPRO

[. . . ] reserve the right to change the contents of this manual and the system it applies to without prior notice. While every effort has been taken by ACT to ensure the accuracy of the information contained within this document, ACT assumes no responsibility for any errors or omissions. No liability is assumed for damages resulting from the use of information contained within this document. Access Control Technology Unit C1, South City Business Centre, Tallaght, Dublin 24, Ireland. This product allows full setup, configuration and monitoring of the ACT family of access control units. [. . . ] Verify Visually A user with this option will have their photograph pop-up on the screen when they are granted access at one of the challenge doors. Visitor Card Users with this option are considered as visitors in the system. They may be enabled or disabled from Visitor Cards under Tools. User fields 1-10 The ten remaining fields in the user view are text fields each of which may contain up to 48 characters for user-defined purposes. To add a photo click on Change which brings up the Photo Import dialog Signature A USB pen device may be used to capture the signature of the user. ACT recommends using IntegriSign signature pad devices http://www. integrisign. com Signature is not available on older operating systems (prior to Windows 2000). Page 59 Access Control Technology DATABASE MENU ACTWinPro User Group The user group view is a window into the user group information stored in the ACTWinPro database. Using the record navigation buttons on the toolbar or the Record menu, individual groups may be selected and viewed. The right side of the screen displays information about the selected group and allows it to be edited. Group Number The user group number is a unique number between 1 and 1000. The field is usually read-only; it may be altered only when creating a new record. Group Name The group name field is a textual description of the group. It is normal for the name to indicate the category of user that will be assigned to this group. Although the name may be up to 32 characters in length, only the first 16 characters will be visible locally on the door controller LCD. Elevator Group An Elevator Group may be assigned to the group which determine which floors the user is allowed access to and at what times. Disabled Check this box to disable all users that have been assigned to this group. Options The group options box contains a number of Group Options that may be configured for this group. Toggle Relay Page 60 Access Control Technology DATABASE MENU ACTWinPro This option causes the relay to toggle whenever the user is granted access. If the door was in its normal state, it is unlocked, and the green reader LED will flash. If the door was already unlocked, then it is returned to normal operation. Activate OP2 This option causes the local OP2 output to be fired for a predetermined period of time whenever the user is granted access. Activate OP3 This option causes the local OP3 output to be fired for a predetermined period of time whenever the user is granted access. Auxiliary door This option allows a user in the group to gain access to the auxiliary door on an ACT1000 controller. Tracking Bypass This option allows tracking functions to be bypassed for users in this group. This means that antipassback, user-limiting and random challenge functions do not apply to users in this group. [. . . ] It is also possible to remove all events. Page 112 Access Control Technology TOOLS ACTWinPro Database Tool Backup Backup the database will immediately create a copy of the database and store the file in the locations specified under View->Options->Program Settings. Restore Restore will retrieve a backup database and read it into the application. Compact Compact will compress the currently opened database so that it uses up less hard-disk space. This should be done after events have been purged, or users deleted. Page 113 Access Control Technology TOOLS ACTWinPro Registration This option is available for the ACTWinPro users only. [. . . ]