User manual ACT ACTPRO 102 INSTALLATION
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ACT ACTPRO 102. We hope that this ACT ACTPRO 102 user guide will be useful to you.
Manual abstract: user guide ACT ACTPRO 102INSTALLATION
Detailed instructions for use are in the User's Guide.
[. . . ] [. . . ] Always Place Varistor Across Lock Terminals
On
12345678
5A 250VAC 5A 30VDC
Entry/Exit Reader
03 OFF OFF OFF ON 04 OFF OFF ON 05 OFF OFF ON 06 OFF OFF ON 07 OFF OFF ON 08 OFF ON 09 OFF ON 10 OFF ON 11 OFF ON 12 OFF ON 13 OFF ON 14 OFF ON 15 OFF ON 16 ON
OFF OFF OFF ON ON ON OFF ON
Door Release Button
FACTORY DEFAULT This unit should be reset to its factory default condition before installation. The correct switch settings may then be set.
Door Contact
Cable: 8 Core Screened Belden 9504 or equiv. Maximum length of 100m at 12V
White Green Blue Red Black Brown Yellow Orange
SENSE CLOCK / DATA 1 DATA / DATA 0 +5V or +12V 0V RED GREEN (Buzzer Ctrl)
OFF OFF OFF OFF OFF ON OFF ON OFF ON ON ON ON ON OFF ON
OFF OFF OFF ON ON ON OFF ON
EXIT READERS For Clock and Data Readers wire exit reader in parallel, but leave it's SENSE line unconnected. For Wiegand Readers, wire the DATA 0 of the exit reader to SENSE on the ACTpro102.
OFF OFF OFF OFF
Example: When the dipswitch is set to 3, Door 1 is set to Address 3 and Door 2 is set to Address 4. [. . . ] [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ACT ACTPRO 102
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ACT ACTPRO 102 will begin.