User manual ACT ACTPRO PRODUCT RANGE

[. . . ] [. . . ] Wire both readers in parallel but connect D0 line of the exit reader into the SENSE line on the controller, leave the SENSE line on the Exit reader unconnected. B A T C H: S E R IA L The above diagram is valid only for clock-and-data type readers. The +5V reader supply on ACT controllers is normally rated at 100mA. Note however that readers from other manufacturers may need to be powered separately if their current requirements exceed this or if they require 12V. Card/Prox Reader The standard wiring colours for ACTPro Proximity and Pin readers is shown above. Readers should be a maximum of 30m from the controller when powered from +5V and a maximum of 100m when powered from +12V. 02X X -1 P R ODUC T : AC T P ro R E V 1. 3 NUMB E : 00X X X X R 0123456789 1A 125V AC 1A 30V DC Rear view of ACTPro 1040/1050/1060 connected to the ACT2000/1000/DS100 0V R ed L E D G rn L E D B uzz C trl 5-12V dc Data / D0 C lock / D1 Sense U nit 8 Tallaght B usiness Centre, W hitestown, Tallaght, Dublin 24, Ireland. E-mail: sales@ accesscontrol. ie W eb: www. accesscontrol. ie OMR ON 5A 250V AC 5 A 3 0 V DC OMR ON Internal buzzer is activated by applying 0V to Buzz Ctrl [. . . ] [. . . ]