User manual ACT ACT5 DIGITAL KEYPAD

[. . . ] ACT5 Digital Keypad Programming 30 SECOND PROGRAMMING GUIDE (for typical system) 1. [. . . ] wait required period} (Stop timing) {Buzzer stops -- timer set} ü Incorrect Code Lockout When three invalid codes have been entered in a row. During this time, the red indicator will flash and all user coded will be inactive. The keypad is now ready for normal use. Restoring Factory Defaults Note: The keypad may be returned to its factory default condition at any time by entering the programming mode and pressing the ü three times. (From Programming Mode) üüü (Factory Defaults Restored & Keypad exits programming mode) If the programming code has been forgotten. Note: The keypad will not operate correctly without LK1 in place. Unit 8, IDA Business Park, Whitestown, Dublin Ireland. Tel: 353-1-4622585 Fax: 353-1-4622587, Copyright © 2003 Access Control Technology Ltd. (18-00001-27) For full details on the ACT product range and a list of distributors, Visit our website www. accesscontrol. ie As with any access control system, always ensure that there is an alternate means of escape in the event of the unit failing to operate due to power loss or in the event of fire. · · · · Don't forget to change the programming code to something known only to yourself. Never use the onboard relay to switch AC mains voltage. An external relay isolated electrically from the ACT5 should be used for this purpose. Always remember to place the supplied Varistor across the terminals of the door strike coil to protect the relay contacts. Always remember to factory default the controller before you start programming. INSTALLATION NOTES IMPORTANT Downloaded from: http://www. guardianalarms. net ACT5 DIGITAL KEYPAD T he A CT 5 may be powered from 12 or 24V A C or DC. Door R elease B utton Fig 2 Mounting instructions for flush mount unit Spacers break away from main component when required by installer for use. View showing spacers stacking Power up without link if Programming code has been lost Power Supply Unit Note : Standard pattress box. SCREWS View showing mounting plate before spacers are broken away by installer. Note: Determine the distance between the pattre and the mounting plate, using the spacers are labeled 1mm to 4mm. [. . . ] Place the Reader / Keypad onto the surface mount collar and clip down into place. Use the security screw supplied to attach the unit to the surfce mount collar. Place the cap onto the unit and push firmly into place. [. . . ]