User manual ACER T212A

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ACER T212A. We hope that this ACER T212A user guide will be useful to you.


ACER T212A : Download the complete user guide (1735 Ko)

You may also download the following manuals related to this product:

   ACER T212A (1896 ko)
   ACER T212A (1783 ko)
   ACER T212A (2256 ko)
   ACER T212A (2016 ko)
   ACER T212A (1785 ko)
   ACER T212A (2134 ko)
   ACER T212A (1743 ko)
   ACER T212A (1798 ko)
   ACER T212A (2111 ko)
   ACER T212A (2073 ko)
   ACER T212A (2194 ko)
   ACER T212A (1044 ko)
   ACER T212A (1044 ko)
   ACER T212A (1044 ko)
   ACER T212A (1044 ko)
   ACER T212A (1044 ko)
   ACER T212A (1044 ko)
   ACER T212A (1044 ko)
   ACER T212A (1044 ko)
   ACER T212A (1044 ko)
   ACER T212A (1044 ko)
   ACER T212A (2111 ko)
   ACER T212A (1044 ko)
   ACER T212A (1044 ko)
   ACER T212A ǔ (1363 ko)
   ACER T212A QUICK START GUIDE (1044 ko)
   ACER T212A QUICK START GUIDE (1044 ko)
   ACER T212A QUICK START GUIDE (1044 ko)
   ACER T212A QUICK START GUIDE (1044 ko)
   ACER T212A QUICK START GUIDE (1044 ko)

Manual abstract: user guide ACER T212A

Detailed instructions for use are in the User's Guide.

[. . . ] Cleaning and user maintenance shall not be made by children without supervision. WARNING: Unattended cooking on a hob with fat or oil can be dangerous and may result in fire. NEVER try to extinguish a fire with water, but switch off the appliance and then cover flame e. WARNING: If the surface in glass-ceramic is cracked, switch off the appliance to avoid the possibility of electric shock. [. . . ] 555 mm mm 55 m m 475 GB Electrical connection Hook fastening diagram Hooking position for top H=20mm Hobs equipped with a three-pole power supply cable are designed to operate with alternating current at the voltage and frequency indicated on the data plate (this is located on the lower part of the appliance). If the appliance is to be installed above a built-in electric oven, the electrical connection of the hob and the oven must be carried out separately, both for electrical safety purposes and to make extracting the oven easier. Hooking position for top H=30mm Front Connecting the supply cable to the mains Install a standardised plug corresponding to the load indicated on the data plate. The appliance must be directly connected to the mains using an omnipolar circuit-breaker with a minimum contact opening of 3 mm installed between the appliance and the mains. The circuit-breaker must be suitable for the charge indicated and must comply with current electrical regulations (the earthing wire must not be interrupted by the circuitbreaker). The supply cable must not come into contact with surfaces with temperatures higher than 50°C. The installer must ensure that the correct electrical connection has been made and that it is compliant with safety regulations. Before connecting to the power supply, make sure that: • The appliance is earthed and the plug is compliant with the law. € The socket can withstand the maximum power of the appliance, which is indicated on the data plate. € The voltage is in the range between the values indicated on the data plate. If the socket is incompatible with the plug, ask an authorised technician to replace it. Unscrew the nozzles using a 7 mm socket spanner, and replace them with nozzles for the new type of gas (see table 1 “Burner and nozzle characteristics”). Reassemble the parts following the above procedure in the reverse order. Once this procedure is finished, replace the old rating sticker with one indicating the new type of gas used. Replace the nozzles with models that are configured for use with the new type of gas (see Table 1). Replace all the components by completing the above operations in reverse order. Having adjusted the flame to the required low setting, while the burner is alight, quickly change the position of the knob from minimum to maximum and vice versa several times, checking that the flame does not go out. If the device fails to work when the burners are set to the low flame setting, increase this low flame setting using the adjusting screw. Once the adjustment has been made, replace the seals on the by-passes using sealing wax or a similar substance. If the appliance is connected to liquid gas, the regulation screw must be fastened as tightly as possible. Once this procedure is finished, replace the old rating sticker with one indicating the new type of gas used. Should the gas pressure used be different (or vary slightly) from the recommended pressure, a suitable pressure regulator must be fitted to the inlet pipe (in order to comply with current national regulations). [. . . ] € In case of malfunction, under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or further malfunctioning of the appliance. € Always make sure that pan handles are turned towards the centre of the hob in order to avoid accidental burns. € Do not close the glass cover (if present) when the gas burners or electric hotplates are still hot. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ACER T212A




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ACER T212A will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.