User manual ABIT WLP-01

[. . . ] Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 5. 1 Wireless LAN Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 5. 2 Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 5. 2. 1 Federal Communications Commission Statement . . . . . . . . . . . . . . . . . . . . 20 5. 2. 2 European Notice. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] · A motherboard with PCI Express Slot · Minimum 64MB system memory · Operating system Station mode: Windows XP/Server 2003, Windows XP/Server 2003 x64 AP/wireless bridge mode: Windows XP/Server 2003 · An optical drive for utilities and driver installation 2. 2 Hardware Installation The WLP-01 package comes together with an omni-directional portable antenna to extend its maximum operating range. (Due to each motherboard's different designing, it is recommended to install the WLP-01 card on PCI-E X1 slot, so as to avoid degrading the speed of the PCI-E X16 card. ) Plug the WLP-01 card with its connector-side vertically down into the slot. (Avoid touching the connector (golden fingers) when holding the WLP-01 card. ) Secure the WLP-01 card by its bracket onto the chassis's rear I/O panel. 3. 4. 6. (This picture is for reference only, and may have size, shape, or parts differences in the antenna or WLAN card itself. ) Connect the cable-end from the external antenna to the antenna port on WLP-01 card. A wide and open position will help to increase the operating range. WLP-01 7 2. 2. 1 Operating Range The signal range of WLP-01 depends on the operating environment. Obstacles such as walls and metal barriers could reflex or absorb radio signals. Devices such as microwave oven can also interfere the wireless network tremendously. 802. 11b: Indoor 130ft (40m), outdoor (LOS, Light-of-Sight) 1000ft (310m) 802. 11g: Indoor 80ft (30m), outdoor (LOS, Light-of-Sight) 200ft (60m) By default, the WLP-01 automatically adjusts the data rate. The closer the wireless stations are, the better signal and transmit speed they receive. To improve your wireless transmission, move your wireless stations closer to the WLP-01. 2. 3 Driver Installation Place the "Driver & Utility CD" into the CD-ROM drive in your system. If not, browse the root directory of the CD-ROM via the File Manager, and double click the "AUTORUN" file. The contents of the "Driver & Utility CD" packed with WLP-01 are subject to change without notice. If your computer is using Windows operating system, it will automatically detect the WLP-01 when system boots and displays an "Add New Hardware Wizard" window. The "Driver & Utility CD" automatically displays the Drivers menu if the "AUTORUN" function is enabled in your computer. Click the wireless driver and follow the on-screen instructions to install the WLP-01 driver. If the "AUTORUN" function is disabled in your computer, locate the Wireless folder under the root directory of the "Driver & Utility CD", then double click the [Setup. exe] file to start installation. Make sure to select the correct operating-channel plan according to your residence so as to avoid possible legal litigation. To use the "Soft AP" function, you may need to install Ethernet adapter driver. 8 WLP-01 3. Right-click the network icon located at the desktop shortcut, the pop-up dialogue appears. Choose a wireless network in range, and then click [Connect] button to start connecting. 3. Wait while the Windows connects to the wireless network you choose. 4. Your network is in AP Mode. 4. 2. 2 Join an existing wireless network Please use Windows automatic network configuration to connect an existing wireless network or change the wireless network settings. WLP-01 13 4. 3 Setup Utility 1. There are five icons at the upper column: Network Monitor, Status, Statistics, Advanced, and Internet Connection Sharing (ICS). [. . . ] EN60950 (IEC950) Product Safety R&TTL(CE) MANUAL REGULATORY REQUIREMENT(WLAN-IEEE 802. 11b/g) 802. 11b/g Restrictions · · European standards dictate maximum radiated transmit power of 100mW EIRP and frequency range 2. 400-2. 4835GHz In France, the equipment must be restricted to the 2. 4465-2. 4835GHz is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (89/336/EEC), Low-voltage Directives (73/23/EEC) and the Amendment Directive (93/68/EEC), the procedures given in European Council Directive 99/5/EC and 89/3360EEC. CE Declaration of Conformity The equipment was passed. The test was performed according to the following European standards. EMC · · · EN 301 489-1 V1. 4. 1:2002; EN 301 489-17 V1. 2. 1:2002 Radio EN 300 328 V1. 6. 1 (2004) Safety & Health EN 60950-1(2001); EN 50385(2002) WLP-01 21 5. 2. 3 NCC(DGT) Statement User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) This document contains important information for users with regards to the proper disposal and recycling of abit products. Consumers are required to comply with this notice for all electronic products bearing the following symbol 22 WLP-01 6. 323, Yang Guang St. , Neihu, Taipei, 114, Taiwan Tel: 886-2-8751-3380 Fax: 886-2-8751-3381 Sales: sales@abit. com. tw Marketing: market@abit. com. tw North America, South America Universal ABIT (USA) Corporation 2901 Bayview Drive, Fremont, CA 94538, U. S. A. [. . . ]