User manual ABIT VA-10_11_GUIDE REV. 2.01

[. . . ] VA-10 / VA-11 Brief Installation Guide (A complete user's manual is also available via browsing the Driver & Utilities CD. ) Features & Specifications Processor · Supports AMD Athlon XP Socket A Processors with 333/266 MHz Front Side Bus · Supports AMD K7 AthlonTM XP FSB 333/266MHz Processors Chipset · VIA KM400 / VT8235 chipset · Supports Hi-Speed Universal Serial Bus (USB 2. 0) · Int. Accelerated Graphics Port connector supports AGP 8X /4X (0. 8V /1. 5V) Memory · Two 184-pin DIMM sockets (Un-buffered Non-ECC DIMM) · Supports 2 DIMM DDR 333/266/200 (Max. [. . . ] Chipset Fan Floppy Disk Drive: · This connector connects up to two floppy drives with a 34-wire, 2-connector floppy cable. Front Panel Switches & Indicators Headers: Infrared Device Header: · This header connects to an optional infrared device attached to chassis. Internal Audio Connectors: · Connects to internal audio sources. Additional IEEE1394 Port Headers: (For VA-11 only) · These headers each provide one additional IEEE1394 port connection through an extension cable and bracket. Pin 1 3 5 7 9 Assignment TPA0 + GND TPB0 + +12V NC Pin 2 4 6 8 10 Assignment TPA0 GND TPB0 +12V GND · Mouse: PS/2 mouse connector. (Rear Left / Rear Right): Connects to the rear left and rear right channel in the 5. 1 channel audio system. (Center / Subwoofer): Connects to the center and subwoofer channel in the 5. 1 channel audio system. S/PDIF Out: This connector provides an S/PDIF out connection through optical fiber to digital multimedia devices. (Front Left / Front Right): Connects to the front left and front right channel in the 5. 1-channel or regular 2-channel audio system. CMOS Memory Clearing Header: · This header uses a jumper to clear the CMOS memory. [. . . ] Press <Delete> key immediately will allow you to enter the BIOS Setup Menu. Note: Don't change the parameters inside the BIOS Setup Menu unless you are thoroughly aware of the BIOS settings. [. . . ]