User manual ABIT SV-1A

[. . . ] SV-1A AMD Athlon 64 Server Board Socket 939 User's Manual Rev. 1. 00 Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual. No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy or fitness for any particular part of this document. In no event shall the manufacturer be liable for direct, indirect, special, incidental or consequential damages arising from any defect or error in this manual or product. [. . . ] Integrated Peripherals OnChip IDE Device: Click <Enter> key to enter its submenu: User's Manual 3-12 SATA RAID ROM: Select this item to enable/disable the SATA RAID BIOS during POST. IDE Bus Master: Chapter 3 This option enables or disables the IDE bus mastering capability under the DOS environment. Onboard IDE-1 Controller: This item allows you to enable or disable the primary and secondary IDE controller. Select [Disabled] if you want to add a different hard drive controller. Onboard IDE-2 Controller: The description is same as the OnChip IDE-1 Controller. Onboard PCI Device: Click <Enter> key to enter its submenu: Booting OS Selection: This item selects the booting OS. Primary PCI-X Bus Mode: This item selects the bus mode for primary PCI-X slot. SV-1A BIOS Setup Onboard SATA Controller: This item enables or disables the Serial ATA controller. SATA ROM: This item enables or disables the boot ROM of the Serial ATA devices. Option ROM: This item enables or disables the boot ROM of the device added at PCIXA1 slot. Secondary PCI-X Bus Mode: This item selects the bus mode for secondary PCI-X slot. Onboard LAN Controller: This option enables or disables the LAN controller. LAN Boot ROM: 3-13 This item allows you to use the boot ROM (instead of a disk drive) to boot-up the system and access the local area network directly. Option ROM: This item enables or disables the boot ROM of the device added at PCIXB1 slot. Option ROM: This item enables or disables the boot ROM of the device added at PCIXB2 slot. User's Manual 3-14 Chapter 3 SuperIO Device: Click <Enter> key to enter its submenu: Onboard FDD Controller: This option enables or disables the onboard FDC controller. Onboard Serial Port 1 / Onboard Serial Port 2: This item determines which I/O addresses the onboard Serial Port controller will access. [Auto]: The system automatically select an I/O address for the onboard Serial Port. [3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3]: Allows you to manually select an I/O address for the onboard Serial Port. Onboard Parallel Port: This item specifies the I/O address used by the parallel port. [Disabled]: This option prevents the parallel port from accessing any system resources. When the value of this option is set to [Disabled], the printer port becomes unavailable. [378/IRQ7]: This option allows the parallel port to use [378/IRQ7] as its I/O port address. The majority of parallel ports on computer systems use IRQ7 and I/O Port 378H as the standard setting. SV-1A BIOS Setup 3-15 [278/IRQ5]: This option allows the parallel port to use [278/IRQ5] as its I/O port address. [. . . ] They should know best what your system configuration is and your problem. If you feel that you need to contact ABIT directly you can send email to the ABIT technical support department. First, please contact the support team for the branch office closest to you. They will be more familiar with local conditions and problems and will have better insight as to which resellers offer what products and services. [. . . ]