User manual ABIT SU-2S

[. . . ] SU-2S Dual Opteron Server Board Socket 940 User's Manual Rev. 1. 00 Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual. No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy or fitness for any particular part of this document. In no event shall the manufacturer be liable for direct, indirect, special, incidental or consequential damages arising from any defect or error in this manual or product. [. . . ] [Enabled/Sec. ]: Enable the Watch Dog function by the timer based on seconds. [Enabled/Min. ]: Enable the Watch Dog function by the timer based on minutes. Watch Dog Time-Out Value Type in the Time-Out value for your Watch Dog function. 3. 2. 3. Integrated Peripherals IDE Bus Master: This option enables or disables the IDE bus mastering capability under the DOS environment. Onboard IDE-1 Controller This item enables or disables the onboard IDE-1 controller. Onboard IDE-2 Controller This item enables or disables the onboard IDE-2 controller. User's Manual 3-12 Chapter 3 Onboard PCI Device: Click <Enter> key to enter its submenu: Onboard SATA Controller: This option enables or disables the onboard SATA controller. Onboard LAN1 Controller: This option enables or disables the LAN1 controller. LAN Boot ROM This item allows you to use the boot ROM (instead of a disk drive) to boot-up the system and access the local area network directly. Onboard LAN2 Controller: This option enables or disables the LAN2 controller. LAN Boot ROM This item allows you to use the boot ROM (instead of a disk drive) to boot-up the system and access the local area network directly. SU-2S BIOS Setup 3-13 Onboard SO-DIMM slot This option enables or disables the onboard SO-DIMM slot controller. PCI-X SLOT1 This option enables or disables the PCI-X slot1 controller. PCI-X SLOT2 This option enables or disables the PCI-X slot2 controller. PCI-X SLOT3 This option enables or disables the PCI-X slot3 controller. Option ROM This item allows you to use the ROM device. Back to Integrated Peripherals Menu: Onboard USB Controller: This item enables the USB controller at all USB ports or specific port(s). USB Keyboard Support: This item allows you to select [BIOS] for using USB keyboard in DOS environment, or [OS] in OS environment. USB Mouse Support: This item allows you to select [BIOS] for using USB mouse in DOS environment, or [OS] in OS environment. User's Manual 3-14 Chapter 3 Onboard FDD Controller: This option enables or disables the onboard FDC controller. Onboard Serial Port 1 / Onboard Serial Port 2: This item determines which I/O addresses the onboard Serial Port controller will access. [Auto]: The system automatically select an I/O address for the onboard Serial Port. [3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3]: Allows you to manually select an I/O address for the onboard Serial Port. Onboard Parallel Port: This item specifies the I/O address used by the parallel port. [Disabled]: This option prevents the parallel port from accessing any system resources. [. . . ] They should know best what your system configuration is and your problem. If you feel that you need to contact ABIT directly you can send email to the ABIT technical support department. First, please contact the support team for the branch office closest to you. They will be more familiar with local conditions and problems and will have better insight as to which resellers offer what products and services. [. . . ]