User manual ABIT SI-1NA
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ABIT SI-1NA. We hope that this ABIT SI-1NA user guide will be useful to you.
 |
Manual abstract: user guide ABIT SI-1NA
Detailed instructions for use are in the User's Guide.
[. . . ] SI-1Na
Brief Installation Guide
(A complete user's manual is also available via browsing the Driver & Utilities CD. )
Features & Specifications
CPU
· Supports single Pentium 4 478-pin processor up to
· PS/2 keyboard connector · 2 RJ-45 LAN connectors
2. 8GHz (based on 400MHz FSB) Chipset
· Intel 845GL chipset Memory Controller Hub (MCH) · Supports PCI 2. 2, Ultra ATA/100 IDE protocol
System BIOS · Phoenix/Award Plug and Play BIOS · 4M-bit Flash ROM Form Factor · 9. 6" x 9. 6" Miscellaneous · DOM (Disk On Module) Support · Hardware monitoring, ACPI, Wake on LAN · Support both 3. 3V and 5V PCI Riser Card Note: All brand names and trademarks are the property of their respective owners.
(ICH4) Memory · Two 184-pin DIMM sockets support PC1600/PC2100 un-buffered low profile memory · Up to 2GB, none ECC memory capacity LAN
· Intel 82550EY · Dual 10/100Mbps LAN Ports · Support IPsec feature
Connectors, Headers, and Jumper
Note: Always power off the computer and unplug the AC power cord before adding or removing any peripheral or component. [. . . ] 1. 01
External I/O Panel:
J6: PCI Slot · This slot provides a 33 MHz/32 bit PCI connection. FPIO1 Header:
JP1: Auto-Reboot Switch
· VGA1: Connects to VGA monitor signal input. · COM1: Connects to external modem, serial mouse or
· Open (default): Automatically reboot the system
other devices that supports this communication protocol. CCMOS1 Jumper: · This header uses a jumper to clear the CMOS memory. COM2 Header: · This header provides connection to external COM2 bracket through an extension cable.
when it fails to boot up.
· Close: Disable the automatically reboot function.
LPT1 Header:
· These headers provide connection to the switches and
indicators at font panel.
Pin 1-2 3-4 5-6 7-8 9-10 Description Power On Reset No Connection Power LED IDE0 LED Pin 11-12 13-14 15-16 17-20 Description No Connection LAN1 LED LAN2 LED No Connection
· These headers provide connection to external LPT1
bracket through an extension cable. VGA2 Connector: · This connector provides an additional VGA output.
USB1/USB2 Headers: · These two headers each provide two USB ports connection.
FAN1~FAN5 Connectors: · Connects to 3-leaded fan connector. [. . . ] Note: Don't change the parameters inside the BIOS Setup Menu unless you are thoroughly aware of the BIOS settings. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ABIT SI-1NA
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ABIT SI-1NA will begin.