User manual ABIT SD7-533

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ABIT SD7-533. We hope that this ABIT SD7-533 user guide will be useful to you.


ABIT SD7-533 : Download the complete user guide (1715 Ko)

Manual abstract: user guide ABIT SD7-533

Detailed instructions for use are in the User's Guide.

[. . . ] Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual. No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy or fitness for any particular part of this document. In no event shall the manufacturer be liable for direct, indirect, special, incidental or consequential damages arising from any defect or error in this manual or product. Product names appearing in this manual are for identification purpose only and trademarks and product names or brand names appearing in this document are the property of their respective owners. [. . . ] This item allows you disable all internal PCI/IDE devices, or enable one of them. The enabled items will apear white in color and disabled items will show in a blue green color. " IDE Burst Mode: Two options are available: Disabled or Enabled. Selecting Enabled reduces latency between each drive read/write cycle, but may cause instability in IDE subsystems that cannot support such fast performance. If you are getting disk drive errors, try setting this value to Disabled. This field is not available to enter when the "Internal PCI/IDE" field is Disabled. " IDE Primary Master PIO: Six options are available: Auto ) Mode 0 ) Mode 1 ) Mode 2 )Mode 3 ) Mode 4. The BIOS can auto-detect the transfer mode of the IDE devices in order to set its data transfer rate (Default). You can select the PIO mode from Mode 0 to Mode 4 of the IDE devices in order to set its data transfer rate. This field is not available to enter when the "Internal PCI/IDE" field is Disabled or Secondary. " IDE Primary Slave PIO: Six options are available: Auto ) Mode 0 ) Mode 1 ) Mode 2 )Mode 3 ) Mode 4. The BIOS can auto-detect the transfer mode of the IDE devices in order to set its data transfer rate (Default). You can select the PIO mode from Mode 0 to Mode 4 of the IDE devices in order to set its data transfer rate. This field is not available to enter when the "Internal PCI/IDE" field is Disabled or Secondary. SD7-533 Motherboard Introducing the BIOS 3-19 " IDE Secondary Master PIO: Six options are available: Auto ) Mode 0 ) Mode 1 ) Mode 2 )Mode 3 ) Mode 4. The BIOS can auto-detect the transfer mode of the IDE devices in order to set its data transfer rate (Default). You can select the PIO mode from Mode 0 to Mode 4 of the IDE devices in order to set its data transfer rate. This field is not available to enter when the "Internal PCI/IDE" field is Disabled or Primary. " IDE Secondary Slave PIO: Six options are available: Auto ) Mode 0 ) Mode 1 ) Mode 2 )Mode 3 ) Mode 4. The BIOS can auto-detect the transfer mode of the IDE devices in order to set its data transfer rate (Default). You can select the PIO mode from Mode 0 to Mode 4 of the IDE devices in order to set its data transfer rate. This field does not appear when the "Internal PCI/IDE" field is Disabled or Primary. " Primary Master Ultra DMA: Two options are available: Disabled or Auto. Ultra DMA is a DMA data transfer protocol that utilizes ATA commands and the ATA bus to allow DMA commands to transfer data at a maximum burst rate of 100 MB/sec. If you encounter the problem of using Ultra DMA devices, you can try to set this item to Disabled. When you select Auto, the system automatically determines the optimal data transfer rate for each IDE device. This field is not available to enter when the "Internal PCI/IDE" field is Disabled or Secondary. " Primary Slave Ultra DMA: Two options are available: Disabled or Auto. [. . . ] Your ABIT authorized distributor should be able to provide the fastest solution to your technical problem. We sell our products through distributors who sell to resellers and stores. Your reseller should be very familiar with your system configuration and should be able to solve your problem much more efficiently than we could. After all, your reseller regards you as an important User's Manual F-2 Appendix F customer who may purchase more products and who can urge your friends to buy from him or her as well. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ABIT SD7-533




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ABIT SD7-533 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.