User manual ABIT KV8

[. . . ] KV8/KV8-MAX3 AMD AthlonTM 64 System Board Socket 754 User's Manual 4200-0410-01 Rev. 1. 00 Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual. No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy or fitness for any particular part of this document. In no event shall the manufacturer be liable for direct, indirect, special, incidental or consequential damages arising from any defect or error in this manual or product. [. . . ] You can enable or disable the onboard FDD controller. KV8/KV8-MAX3 BIOS Setup 3-17 3-6. Power Management Setup Cool'n'Quiet Technology: This option enables or disables the AMD K8 cool and quiet function. When set to Enabled, any event affecting from onchip USB will awaken a system that has powered down. This item can be configured only if the item "ACPI Suspend Type" is set to [S3(STR)]. This item can let you choose when S3 resume active, the VGA BIOS need to be initiative or not. Power Button Function: This item selects the method of powering off your system: [Delay 4 Sec. ]: Pushing the power button for more than 4 seconds will power off the system. This will prevent the system from powering off in case you accidentally hit or pushed the power button. [Instant-Off]: Pressing and then releasing the power button at once will immediately power off the system. CPU THRM-Throttling: This item controls the CPU speed by cutting down its regular power to a percentage during the STR (Suspend To RAM) state. Wakeup by PME# of PCI: Two options are available: Disabled or Enabled. When set to Enabled, any event affecting from PCI card (PME) will awaken a system that has powered down. User's Manual 3-18 Chapter 3 Wakeup by Alarm: Two options are available: Disabled or Enabled. When set to Enabled, you can set the date and time at which the RTC (real-time clock) alarm awakens the system from Suspend mode. Date (of Month) Alarm / Resume Time (hh:mm:ss): You can set the Date (month) Alarm and Time Alarm (hh:mm:ss). POWER ON Function: This item selects the way you want your system to power on. [Password]: Use a password to power on the system, select this option then press <Enter>. Type in exactly the same password to confirm, and then press <Enter>. [Hot KEY]: Use any of the function keys between <F1> to <F12> to power on the system. [Mouse Left]: Double click the mouse left button to power on the system. [Mouse Right]: Double click the mouse right button to power on the system. [Keyboard 98]: Use the power-on button on the "Keyboard 98" compatible keyboard to power on the system. NOTE: The mouse wake up function can only be used with the PS/2 mouse, not with the COM port or USB type. [. . . ] After all, your reseller regards you as an important customer who may purchase more products and who can urge your friends to buy from him or her as well. They should know best what your system configuration is and your problem. If you feel that you need to contact ABIT directly you can send email to the ABIT technical support department. First, please contact the support team for the branch office closest to you. [. . . ]