User manual ABIT IL-90MV

[. . . ] Introduction Hardware Setup BIOS Setup Driver & Utility CD Intel Socket 478 (Core Duo) Micro ATX Motherboard Intel ViiV Technology Certified Intel 945GT/ICH7m-DH iL-90MV Motherboard Intel Socket 478 (Core Duo) Intel GMA 950 Appendix HDMI 1. 2 Technology RoHS Compliant 7. 1Ch HD Audio User's Manual Intel 82573L GbE LAN iL-90MV User's Manual English, 2nd Edition August, 2006 Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual. No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy or fitness for any particular part of this document. In no event shall the manufacturer be liable for direct, indirect, special, incidental or consequential damages arising from any defect or error in this manual or product. Product names appearing in this manual are for identification purpose only and trademarks and product names or brand names appearing in this document are the property of their respective owners. [. . . ] If you forget the password, you will have to open the computer case and clear all information in the CMOS before you can start up the system. MPS Version Ctrl For OS This item specifies which version of MPS (Multi-Processor Specification) this motherboard will use. Delay IDE Initial (Secs) This item allows the BIOS to support some old or special IDE devices by prolonging this delay time. A larger value will give more delay time to the device for which to initialize and to prepare for activation. Full Screen LOGO Show This item determines to show the full screen logo when booting. Disable Unused PCI Clock This option disables the clock of PCI slot that is not in use. [Yes]: The system automatically detect the unused DIMM and PCI slots, and stop sending clock signal to these unused PCI slots. Set this option to [No] setting if there are adapters that cannot be automatically detected by the system and will cause malfunction. 3-8 iL-90MV 3. 3 Advanced Chipset Features Phoenix ­ AwardBIOS CMOS Setup Utility Advanced Chipset Features X X X X X DRAM Timing Selectable - CAS Latency Time (tCL) - RAS# to CAS# Delay (tRCD) - RAS# Precharge (tRP) - Precharge Delay (tRAS) - System Memory Frequency PCI Express Root Port Func Init Display First HDMI Port Display ** VGA Setting ** Frame Buffer Size DVMT Mode DVMT/FIXED Memory Size By SPD Auto Auto Auto Auto Auto Press Enter PCI Slot DVI Item Help 8MB DVMT 128MB :Move Enter:Select F5: Previous Values +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F6: Fail-Safe Defaults F7: Optimized Defaults BIOS Setup DRAM Timing Selectable This item sets the optimal timings for the following four items, depending on the memory module you are using. The default setting "By SPD" configures these four items by reading the contents in the SPD (Serial Presence Detect) device. The EEPROM on the memory module stores critical parameter information about the module, such as memory type, size, speed, voltage interface, and module banks. CAS Latency Time (tCL) This item controls the latency between the DRAM read command and the time that the data becomes actually available. RAS# to CAS# Delay (tRCD) This item controls the latency between the DRAM active command and the read/write command. RAS# Precharge (tRP) This item controls the idle clocks after issuing a precharge command to the DRAM. Precharge Delay (tRAS) This item controls the number of DRAM clocks used for the DRAM parameters. System Memory Frequency This item selects the DRAM speed. iL-90MV 3-9 PCI Express Root Port Func Click <Enter> key to enter its submenu: Phoenix ­ AwardBIOS CMOS Setup Utility PCI Express Root Port Func PCI Express Slot 1 PCIe Compliancy Mode Auto v1. 0a Item Help :Move Enter:Select F5: Previous Values +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F6: Fail-Safe Defaults F7: Optimized Defaults PCI Express Slot 1 This option enables or disables the PCI Express port function. PCIe Compliancy Mode This item selects the mode for PCI Express add-on card. Back to Advanced Chipset Features Setup Menu Init Display First This item selects the primary boot device. HDMI Port Display This item selects the type of display device connected through the "HDMI Port" on this motherboard. [DVI]: Select this option if you are connecting a non-HDMI monitor through the "HDMI Port" on this motherboard. [Normal]: Select this option if you are connecting HDMI digital display through the "HDMI Port" on this motherboard. 3-10 iL-90MV An unmatched configuration will cause the display device abnormal. For example, an HDMI digital device connected to "HDMI Port" under the [DVI] selection will have no sound on the digital display, whereas a non-HDMI monitor connected to "HDMI Port" under the [Normal] selection will cause the screen flickering. Frame Buffer Size This item selects the size of memory pre-allocated for frame buffer. DVMT Mode This item selects the mode of graphics memory that the system will support. [. . . ] (Illustrate the over-clocking status if you had done so. ) Example: Intel 650 3. 4GHz (OC FSB=220MHz) Memory brand: Type in the brand and model name of your memory module. Example: Memory brand: Kingston (KVR533D2N4/1G) Memory size: Type in the size of your memory module. Example: 512M* 4PCS Memory configuration: Type in the memory configuration in BIOS setting. Example: Memory Timing: 2. 5-3-3-7 @533MHz Graphics card: Type in the brand and model name of your graphics card. [. . . ]