User manual ABIT GF4 MX

[. . . ] Siluro GF4 MX Series Graphics Accelerator User's Manual (MX-8X, MX-8X LP, MX-SE, MX-SE T) 4200-0368-11 Rev. 1. 02 Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual. No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy or fitness for any particular part of this document. In no event shall the manufacturer be liable for direct, indirect, special, incidental or consequential damages arising from any defect or error in this manual or product. [. . . ] Both applies the zoom selection to the both the primary and the secondary display on which the video is rendered. Out-In: Drag the slider to zoom in or out of the selected area of the video playback screen. User's Manual 4-12 Chapter 4 NVRotate: : You can use the left/right arrow button to perform the rotation options below. Or you can click circular arrow on the right top and drag it in the direction of the rotation. Inverted Landscape: Inverted Landscape results in a 180-degree rotation. Inverted Portrait: Inverted Portrait results in a 270-degree rotation. nView Display Mode: The nView functions allow you to connect two separate output devices (analog monitor, digital flat panel or TV) to a single graphics card. Standard Mode (DualView): Use this mode if you have only one display device attached to your NVIDIA GPU-based graphics card. Siluro GF4 MX Series Display Properties 4-13 Clone Mode: This mode outputs an exact copy of the primary display on the secondary device. To disable Clone Mode, select Standard Mode and click OK or Apply. Horizontal Span: This mode allows you to extend the Windows desktop across two display devices horizontally. In this mode the two displays combine to form a wide, spanned display surface, which is useful when viewing items that are wider than a single display. User's Manual 4-14 Chapter 4 Vertical Span: This mode allows you to extend the Windows desktop across two display devices vertically. In this mode the two displays combine to form a tall, spanned display surface, which is useful when viewing items that are taller than a single display. Display: Displays all current nView displays. If more than one device is connected and you have switched to a mode other than Standard, you select which display is the current display. You can also click on the monitor graphic in the control directly above to select it as the current display. Disable auto-panning on secondary device (viewport lock): Turning on this feature will lock the current pan position on the currently selected display. This lets you effectively "freeze" the virtual desktop at a certain position. Detect Displays: Click this button to detect all display devices connected to your graphics card. Use this feature if you have plugged in any displays after the control panel was opened. Device Settings: Click this button to setup or change settings related to the output device used for the current display. Siluro GF4 MX Series Display Properties 4-15 Desktop Utilities: Display the Media Center icon in the taskbar: This option adds the Media Center icon to the Windows taskbar, allowing you to apply any of the custom Direct3D, OpenGL or color settings "on the fly" from a convenient popup menu. The menu also contains items for restoring default settings and accessing the Display Properties dialog box. Enable Desktop Manager: Allows you to choose the icon used to represent the Media Center utility in the Windows taskbar. Then choose "OK" or "Apply" to update the icon in the taskbar. Desktop Manager Configuration: Click this button to open the nView Desktop Manager properties panel after enabling the Enable Desktop Manager option. The nView Desktop Manager properties panel lets you configure a variety of Desktop Manager features, for single and multiple desktops and displays [monitors]. User's Manual 4-16 Chapter 4 4-8. nView Desktop Manager This tab contains information about the nView Desktop Manager. The Setup Wizard can also be accessed from this tab. Info: Enable nView Desktop Manager: Loads or unloads nView Desktop Manager desktop management. [. . . ] If you feel that you need to contact ABIT directly you can send email to the ABIT technical support department. First, please contact the support team for the branch office closest to you. They will be more familiar with local conditions and problems and will have better insight as to which resellers offer what products and services. Due to the huge number of emails coming in every day and other reasons, such as the time required for problem reproduction, we will not be able to reply to every email. [. . . ]