User manual ABIT DIGIDICE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ABIT DIGIDICE. We hope that this ABIT DIGIDICE user guide will be useful to you.


ABIT DIGIDICE : Download the complete user guide (3073 Ko)

Manual abstract: user guide ABIT DIGIDICE

Detailed instructions for use are in the User's Guide.

[. . . ] AB-2003 DigiDice Socket 478 Mini PC System User's Manual 4200-0382-24 Rev. 1. 01 Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual. No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy or fitness for any particular part of this document. In no event shall the manufacturer be liable for direct, indirect, special, incidental or consequential damages arising from any defect or error in this manual or product. [. . . ] Intel OnScreen Branding: This item determines whether to display the "Intel Inside" logo or not at system boots up. User's Manual 4-10 Chapter 4 4. 4. Advanced Chipset Features DRAM Timing Selectable: This item sets the optimal timings for the following four items, depending on the memory module you are using. The default setting "By SPD" configures these four items by reading the contents in the SPD (Serial Presence Detect) device. The EEPROM on the memory module stores critical parameter information about the module, such as memory type, size, speed, voltage interface, and module banks. CAS Latency Time: This item controls the latency between the DRAM read command and the time that the data becomes actually available. Act to Precharge Delay: This item controls the number of DRAM clocks used for the DRAM parameters. DRAM RAS# to CAS# Delay This item controls the latency between the DRAM active command and the read/write command. DRAM RAS# Precharge: This item controls the idle clocks after issuing a precharge command to the DRAM. AB-2003 DigiDice BIOS Setup 4-11 AGP Aperture Size: This option specifies the amount of system memory that can be used by the AGP device. The aperture is a portion of the PCI memory address range dedicated for graphics memory address space. Init Display First: This item selects to initialize AGP or PCI Slot first when the system boots. Game Accelerator: This item selects the mode for Game Accelerator among the options of [Auto], [Turbo], [Street Racer], and [F1]. NOTE: The option [Street Racer] and [F1] mode will stress the DDR memory critically; not every kind of DDR memories could be stable with these two options. Refresh Cycle Time: This item determines the DRAM Refresh Cycle among [Auto], [Normal], [Enhanced], [Strengthened], and [Aggressive]. Read delay Adjust(tRDA): This item determines to adjust the timing of DRAM Read Delay. Command Per Clock(CPC): This item determines the address command timing according to the DRAM strobe clock. On-Chip VGA: This option enables or disables the on-chip VGA controller. Frame Buffer Size: This option selects the size of on-chip frame buffer. User's Manual 4-12 Chapter 4 4. 5. Integrated Peripherals Onboard IDE Device: Click <Enter> key to enter its submenu: AB-2003 DigiDice BIOS Setup 4-13 IDE Bus Master: This option enables or disables the IDE bus mastering capability under the DOS environment. Onboard IDE-1 Controller: This item enables or disables the onboard IDE-1 controller. Onboard IDE-2 Controller: This item enables or disables the onboard IDE-2 controller. Onboard S-ATA Controller: This item determines the function for on-chip Serial ATA. [Auto]: Allows the Serial ATA controller to be arranged by BIOS automatically. [. . . ] After all, your reseller regards you as an important customer who may purchase more products and who can urge your friends to buy from him or her as well. They should know best what your system configuration is and your problem. If you feel that you need to contact ABIT directly you can send email to the ABIT technical support department. First, please contact the support team for the branch office closest to you. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ABIT DIGIDICE




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ABIT DIGIDICE will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.