User manual ABIT AW9D-MAX

[. . . ] Introduction AW9D-MAX AW9D Motherboard Socket 775 Intel Core 2 Duo (Extreme Edition) Intel Pentium Extreme Edition Intel Pentium D Intel Pentium 4 Hardware Setup User's Manual BIOS Setup LGA775 ATX Motherboard Intel 975X / ICH7R 1066MHz FSB Dual DDR2 800 Dual PCI-E X16 Graphics Slots Dual GbE LAN (AW9D-MAX) 8x SATA 3Gb/s (AW9D-MAX) About this Manual: This user's manual contains all the information you may need for setting up this motherboard. To read the user's manual of PDF format (readable by Adobe Reader), place the "Driver & Utility CD" into the CD-ROM drive in your system. The auto-run screen will appear, click the "Manual" tab to enter its submenu. If not, browse the root directory of the CD-ROM via the File Manager, and double click the "AUTORUN" file. Driver & Utility CD IEEE 1394 (AW9D-MAX) HD 7. 1 Audio Silent OTESTM Technology uGuruTM Technology Appendix AW9D-MAX, AW9D User's Manual English, 1st Edition August, 2006 Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual. [. . . ] Reference Temperature This item selects the reference point for taking temperature among the available options of CPU, SYS, and PWM Temperature, but there is only one "CPU Temperature" item to choose for the "CPU FanEQ Control". Control Temperature High/Low These items set the high and low temperature limit that you want to do the fan speed control. DC Fan Voltage High/Low These items set the high and low voltage limit that you want to provide the fan with. The value of high limit must be set above the one of low limit. 3-10 AW9D-MAX, AW9D 3. 2 Standard CMOS Features Phoenix ­ AwardBIOS CMOS Setup Utility Standard CMOS Features Date (mm:dd:yy) Thu. Jul 27 2006 Time (hh:mm:ss) 12 : 34 : 56 IDE IDE IDE IDE IDE IDE IDE IDE Channel Channel Channel Channel Channel Channel Channel Channel 1 1 2 2 3 3 4 4 Master Slave Master Slave Master Slave Master Slave None None None None None None None None 1. 44M, 3. 5 in. None Disabled All, But keyboard Item Help Drive A Drive B Floppy 3 Mode Support Halt On Base Memory 640K Extended Memory 1046520K Total Memory 1047552K :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults BIOS Setup Date (mm:dd:yy) This item sets the date you specify (usually the current date) in the format of [Month], [Date], and [Year]. Time (hh:mm:ss) This item sets the time you specify (usually the current time) in the format of [Hour], [Minute], and [Second]. AW9D-MAX, AW9D 3-11 IDE Channel 1 Master/Slave, IDE Channel 2 Master/Slave, IDE Channel 3 Master/Slave, IDE Channel 4 Master/Slave Click <Enter> key to enter its submenu: Phoenix ­ AwardBIOS CMOS Setup Utility IDE Channel 1 Master IDE HDD Auto-Detection Press Enter IDE Channel 1 Master Access Mode Capacity Cylinder Head Precomp Landing Zone Sector Auto Auto 0 MB 0 0 0 0 0 Item Help :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults The items "IDE Channel 3 Master/Slave" and "IDE Channel 4 Master/Slave" appear only when the item "On-Chip SATA" in the "On-Chip IDE Device" menu is set to [Enhanced Mode], or set to [Auto] when SATA ports are connected with devices. IDE HDD Auto-Detection This item allows you to detect the parameters of IDE drives by pressing <Enter> key. IDE Channel 1 Master/Slave, IDE Channel 2 Master/Slave, Extended IDE Drive When set to [Auto], the BIOS will automatically check what kind of IDE drive you are using. If you want to define your own drive by yourself, set it to [Manual] and make sure you fully understand the meaning of the parameters. Please refer to the instruction manual provided by the device's manufacturer to get the setting right. Leave this item at its default [Auto] setting to detect the access mode of your HDD automatically. Capacity This item displays the approximate capacity of the disk drive. Usually the size is slightly greater than the size of a formatted disk given by a disk-checking program. 3-12 AW9D-MAX, AW9D Cylinder This item configures the numbers of cylinders. Precomp This item displays the number of cylinders at which to change the write timing. Landing Zone This item displays the number of cylinders specified as the landing zone for the read/write heads. Sector This item configures the numbers of sectors per track. Back to Standard CMOS Features Setup Menu Drive A & Drive B This item sets the type of floppy drives (usually only Drive A) installed. BIOS Setup Floppy 3 Mode Support This item allows you to use "3 Mode Floppy Drive" in Japanese computer systems by selecting drive A, B, or both. Leave this item at its default [Disabled] setting if you are not using this Japanese standard floppy drive. Halt On This item determines whether the system stops if an error is detected during system boot-up. [All Errors]: The system-boot will stop whenever the BIOS detect a non-fatal error. [All, But Keyboard]: The system-boot will stop for all errors except a keyboard error. [All, But Diskette]: The system-boot will stop for all errors except a diskette error. [. . . ] (Illustrate the over-clocking status if you had done so. ) Example: Intel 650 3. 4GHz (OC FSB=220MHz) Memory brand: Type in the brand and model name of your memory module. Example: Memory brand: Kingston (KVR533D2N4/1G) · · · · 5-6 AW9D-MAX, AW9D · · · · · · · · Memory size: Type in the size of your memory module. Example: 512M* 4PCS Memory configuration: Type in the memory configuration in BIOS setting. Example: Memory Timing: 2. 5-3-3-7 @533MHz Graphics information: Note Graphics card's brand, model and driver version Graphics card: Type in the brand and model name of your graphics card. [. . . ]