User manual ABIT AN9-32X

[. . . ] Introduction AN9 32X Motherboard AMD Socket AM2 User's Manual Hardware Setup BIOS Setup AMD Socket AM2 ATX Motherboard NB: NVIDIA C51XE SB: NVIDIA MCP55PXE 2GHz HT Dual DDR2 800 DIMM Slots NVIDIA SLI Technology Dual PCI-E X16 Slots Dual GbE LAN IEEE 1394a About this Manual: This user's manual contains all the information you may need for setting up this motherboard. To read the user's manual of PDF format (readable by Adobe Reader), place the "Driver & Utility CD" into the CD-ROM drive in your system. The auto-run screen will appear, click the "Manual" tab to enter its submenu. If not, browse the root directory of the CD-ROM via the File Manager, and double click the "AUTORUN" file. Driver & Utility CD 8x SATA 3Gb/s with RAID ABIT GuruTM Technology ABIT Silent OTESTM Technology 7. 1 Channel HD Audio Appendix AN9 32X User's Manual English, 2nd Edition July, 2006 Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual. [. . . ] Shutdown Enable BIOS Setup Use <Space> key to enable system shutdown function. Once the system has detected that the fan speed is lower than the low limit value, system will shutdown automatically. Beep Enable Use <Space> key to enable warning beeps function. If the fan speed is lower than the low limit value, warning beeps will sound. Low Limit These items set the low limit of fan speed. AN9 32X 3-7 FanEQ Control µGuru ABIT EQ FanEQ Control CPU FanEQ Control SYS FanEQ Control AUX1 FanEQ Control AUX2 FanEQ Control AUX3 FanEQ Control AUX4 FanEQ Control Utility V1. 00C Press Press Press Press Press Press Enter Enter Enter Enter Enter Enter Item Help :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit Click <Enter> key to enter its submenu (CPU FanEQ Control): µGuru Utility V1. 00C ABIT EQ CPU FanEQ Control CPU FanEQ Control Enabled -Reference Temperature CPU Temperature -Control Temperature High 65°C/149°F -Control Temperature Low 35°C/95°F -DC Fan Voltage High 12. 0 V -DC Fan Voltage Low 8. 0 V Item Help :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit CPU FanEQ Control When set to [Enabled], these items control the CPU fan speed by the following setting combinations. Reference Temperature This item selects the reference point for taking temperature among the available options of CPU, SYS, and PWM Temperature, but there is only one "CPU Temperature" item to choose for the "CPU FanEQ Control". 3-8 AN9 32X - Control Temperature High/Low These items set the high and low temperature limit that you want to do the fan speed control. DC Fan Voltage High/Low These items set the high and low voltage limit that you want to provide the fan with. The value of high limit must be set above the one of low limit. Click <ESC> key to exit this menu and move back to the main menu of "ABIT EQ". Move the down-arrow key to the next item (SYS FanEQ Control), and then click <Enter> key to enter its submenu: µGuru Utility V1. 00C ABIT EQ SYS FanEQ Control SYS FanEQ Control Enabled -Reference Temperature System Temperature -Control Temperature High 40°C/104°F -Control Temperature Low 30°C/86°F -DC Fan Voltage High 12. 0 V -DC Fan Voltage Low 8. 0 V Item Help BIOS Setup :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit SYS FanEQ Control When set to [Enabled], these items control the SYS fan speed by the following setting combinations. Reference Temperature This item selects the reference point for taking temperature among the available options of CPU, SYS, and PWM Temperature. Control Temperature High/Low These items set the high and low temperature limit that you want to do the fan speed control. DC Fan Voltage High/Low These items set the high and low voltage limit that you want to provide the fan with. The value of high limit must be set above the one of low limit. AN9 32X 3-9 Click <ESC> key to exit this menu and move back to the main menu of "ABIT EQ". Move the down-arrow key to the next item (AUX1 FanEQ Control ~ AUX4 FanEQ Control), and then click <Enter> key to enter its submenu: µGuru Utility V1. 00C ABIT EQ AUX1 FanEQ Control AUX1 FanEQ Control Enabled -Reference Temperature System Temperature -Control Temperature High 40°C/104°F -Control Temperature Low 30°C/86°F -DC Fan Voltage High 12. 0 V -DC Fan Voltage Low 8. 0 V Item Help :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit AUX1 FanEQ Control ~ AUX4 FanEQ Control When set to [Enabled], these items control the AUX1~4 fan speed by the following setting combinations. Reference Temperature This item selects the reference point for taking temperature among the available options of CPU, SYS, and PWM Temperature. Control Temperature High/Low These items set the high and low temperature limit that you want to do the fan speed control. DC Fan Voltage High/Low These items set the high and low voltage limit that you want to provide the fan with. The value of high limit must be set above the one of low limit. 3-10 AN9 32X 3. 2 Standard CMOS Features Phoenix ­ Award BIOS CMOS Setup Utility Standard CMOS Features Date (mm:dd:yy) Mon. Jul 03 2006 Time (hh:mm:ss) 12 : 34 : 56 IDE IDE IDE IDE IDE IDE IDE IDE Channel Channel Channel Channel Channel Channel Channel Channel 1 1 3 4 5 6 7 8 Master Slave Master Master Master Master Master Master None None None None None None None None 1. 44M, 3. 5 in. None Disabled All, But keyboard Item Help Drive A Drive B Floppy 3 Mode Support Halt On Base Memory 640K Extended Memory 1046520K Total Memory 1047552K :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults BIOS Setup Date (mm:dd:yy) This item sets the date you specify (usually the current date) in the format of [Month], [Date], and [Year]. Time (hh:mm:ss) This item sets the time you specify (usually the current time) in the format of [Hour], [Minute], and [Second]. AN9 32X 3-11 IDE Channel 1 Master/Slave, IDE Channel 3~8 Master: Click <Enter> key to enter its submenu: Phoenix ­ Award BIOS CMOS Setup Utility IDE Channel 1 Master IDE HDD Auto-Detection Press Enter IDE Channel 1 Master Access Mode Capacity Cylinder Head Precomp Landing Zone Sector Auto Auto 0 MB 0 0 0 0 0 Item Help :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults IDE HDD Auto-Detection This item allows you to detect the parameters of IDE drives by pressing <Enter> key. IDE Channel 1 Master/Slave, IDE Channel 3~8 Master When set to [Auto], the BIOS will automatically check what kind of IDE drive you are using. [. . . ] (Illustrate the over-clocking status if you had done so. ) Example: Intel 650 3. 4GHz (OC FSB=220MHz) Memory brand: Type in the brand and model name of your memory module. Example: Memory brand: Kingston (KVR533D2N4/1G) · · · · 5-6 AN9 32X · · · · · · · · Memory size: Type in the size of your memory module. Example: 512M* 4PCS Memory configuration: Type in the memory configuration in BIOS setting. Example: Memory Timing: 2. 5-3-3-7 @533MHz Graphics information: Note Graphics card's brand, model and driver version Graphics card: Type in the brand and model name of your graphics card. [. . . ]