User manual AB-COM AB IPBOX 400S

[. . . ] ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ 0. GENERAL INFORMATION Thank you for purchasing the PVR (Personal Video Recorder). This product is fully compliant with the DVB standards and transmits digital broadcasting service directly to your TV through the various satellites and record those programs and enjoying trick play. You can notice that every operation of the PVR is based on a dynamic and user-friendly user interface and menus. [. . . ] While recording a channel from one Satellite, you can only watch or record channels from the other Satellite. Caution) To descramble two channels simultaneously, 2 CI Modules are required. 8. 2. 2 Installing the PVR with one antenna. In the LNB Setting menu, the connection type should be set to" Loop Through" Satellite Antenna has to be connected to the first LNB IN (the first one from the left: see the picture below). The second LNB IN and IF OUT (the first one from the left) should be connected with a coaxial cable. If the connection is done opposite way, the PVR will not be 15 able to scan the channels. When the tuner is reserved for a recording, only the channels from same Polarity group can be watched. Caution) To descramble two channels simultaneously, 2 CI Modules are required 8. 2. 3 Installing the PVR with twin LNB Antenna In the LNB Setting menu, the connection type should be set to "separated" A Satellite Antenna is installed with twin/dual universal LNB. While one tuner is reserved for a recording, all other channels can be watched or recordable. Caution) To descramble two channels simultaneously, 2 CI Modules are required 8. 2. 4 Installing the PVR with two separated antennas with twin LNB. In the LNB Setting menu, the connection type should be set to "separated" Each twin or dual universal LNB is connected to two different Satellite Antennas separately. While one channel is recorded, all channels from two Satellites can be watched or 16 recorded. Caution) To descramble two channels simultaneously, 2 CI Modules are required. 9. BEFORE SETTING 9. 1 Menu Information Selectable lines are generally activated (highlighted). Most of OSD- menus show short information at the bottom of the screen. 9. 2 Basic Key Control With the UP/DOWN direction button you can move the cursor upwards and downwards in the OSD (On Screen Display)- menu. When you have reached the desired option or function, press the OK button to confirm your choice. In case of changing TV channel you can only press UP/DOWN direction button. In most of menus, you can select menu items with LEFT/RIGHT direction button. When you want to return to the previous menu with saving the change, press the MENU Button. When you want to exit from the current menu, press the EXIT button. 10. GET STARTED FOR THE FIRST TIME If it is the first time using the PVR, you should set parameters for system configuration and scan the satellites. When you have finished the procedure, you can start watching TV or listening to the Radio. 17 The HDD Preparing time is depends on HDD data size. If the power goes off unexpectedly, it may requires certain amounts of time to read HDD depends on the existing prerecorded program size on HDD. 10. 1 Switch your TV and PVR On. [. . . ] Press and Hold Power button until you see "USB" on the front display of relook. Click on Finish when it is done. 56 Important) The order of this procedure is very important; please do follow the instruction step by step. When Driver is installed successfully, it is ready to download the latest image to relook (USB download instructions) 17. 2. Relook has to be "USB "upgrade mode (`USB" on the display of relook) 3. [. . . ]