User manual 3M BENCHTOP AIR IONIZER 963 BROCHURE

[. . . ] 963/963E Benchtop Air Ionizers Rapid neutralization of electrostatic charge The ion-generation technology present in the 963 and 963E benchtop air ionizers is capable of producing extremely large amounts of ions, resulting in nearly instantaneous static charge neutralization. The 3M 963 is capable of reducing a static charge of 1000V to 100V in less than one second, at a one foot distance, when tested* at the high fan speed. [. . . ] The fan's gentle airflow does not disturb paper or delicate parts. The high-speed fan setting can be used for more rapid neutralization of static charges in environments where faster decay rates are required. Static-dissipative housing safe to use in ESD sensitive areas The injection-molded plastic case is constructed of static-dissipative plastic. The conductivity of the case prevents a static charge from building up on the surface of the housing, a common problem with ionizers. This "ESD-safe" design allows the ionizer to be part of your overall static-safeguarded electronic workstation. * 1 The use of ionized air in electronics work environments eliminates the build up of potentially damaging static charges. Air ionizers are primarily used to control static charge on nonconductive materials. Grounding is normally used to control charge on conductive objects and personnel, however, nonconductors cannot be grounded to drain electrostatic charge. Ionization is the only method of neutralizing a static charge on a nonconductor. Ionized air can neutralize static charges on circuit board substrates, insulating tapes and plastic objects found in the work area. The 3MTM 963 and 963E benchtop air ionizers, blanket the benchtop with ionized air to help prevent static from damaging sensitive electronics. Two versions of Benchtop Air Ionizer available The 963 benchtop air ionizer uses AC 120V power, while the 963E uses AC 220V/230V power. Both ionizers feature a two-speed fan, a power indicator lamp, a static-dissipative plastic housing, and a combination metal-plastic stand that can also double as a mounting bracket. When tested according to ANSI/ESD S3. 1-1991 Meets Global Regulatory Requirements Global usage of electronic products are often dependent on the product meeting regulatory requirements for the country of usage. To achieve this end, the 3MTM Models 963 and 963E have been tested to, and have passed, regulatory testing for U. S. , Canada, Mexico and the European Union. The 963 carries the UL, C-UL, and NOM marks, while the 963E carries the CE mark. Basic Features · Two versions available, depending on operating voltage · Neutralizes static charges on nonconductive objects · Maintains equal balance of positive-negative ions · Two-speed fan · Static-dissipative housing · UL, C-UL, CE, NOM certification. 963 Benchtop Air Ionizer Properties Model Operating Voltage and Frequency Power Outlet Supplied Power Cord Dimensions Weight Air Velocity Static Discharge Time* Certifications and Approvals Warranty 963 AC 120V 60 Hz 0. 2A 20W IEC 320 Socket 6' (1. 8m) cord with IEC 320 and NEMA 5-15 plugs 6. 0" W x 7. 4" H x 3. 0" D 15. 2cm W x 18. 8cm H x 7. 6cm D 2. 5 lb. [. . . ] SELLER SHALL NOT BE LIABLE TO THE USER OR ANY OTHER PERSON UNDER ANY LEGAL THEORY, INCLUDING BUT NOT LIMITED TO NEGLIGENCE OR STRICT LIABILITY, FOR ANY INJURY OR FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES SUSTAINED OR INCURRED BY REASON OF THE USE OF ANY OF THE SELLER'S PRODUCTS. Electronic Handling & Protection Division 6801 River Place Blvd. Austin, TX 78726-9000 www. 3M. com/ehpd Recycled paper 40% Pre-consumer waste paper 10% Post-consumer waste paper Litho in USA. [. . . ]