User manual 3M 8560 3C CABLE BREAKOUT BOOTSRJS 3C PHASE REJACKETING

[. . . ] 3 Cold Shrink- Silicone Rubber 8560 Series 3/C Cable Breakout Boots RJS Series 3/C Phase Rejacketing System 3 Conductor Cable 3MTM Cold Shrink Silicone Rubber 8560 Series 3/C Cable Breakout Boots and 3MTM Silicone Rubber RJS Series 3/C Phase Rejacketing System are designed to be used in conjunction with three 3M terminations, to seal the breakout area and rejacket the phases on three conductor cable. Innovations in molded silicone rubber technology, now make possible a complete three conductor all silicone termination. [. . . ] Core removal allows the silicone rubber boot to shrink down to a predetermined diameter; creating an environmental enclosure for individual cable phase legs and the overall cable jacket. 8560 Series Breakout Boots are designed to protect the phase leg breakout of 3/C medium voltage power cable from exposure to moisture, contamination, corrosion, ozone, ultra-violet radiation, physical contact and other hazards associated with 3/C termination operating environments. 8560 Series Breakout Boots can be used in conjunction with 3M Silicone Rubber Cold Shrink Rejacketing Sleeves for 3/C shielded power cable terminating applications. Features and Benefits: · Versatile; installs quickly and accommodates a wide range of cable sizes. · Simple hand application; no need for special installation tools. · Excellent resistance to ozone and ultra-violet radiation · Good solvent resistance; compatible with industry ­ approved cable cleaners. · Highly flexible; accommodates all power cable supplier bend radius recommendations. · Seals tight; retains resiliency and pressure even after prolonged years of aging and exposure. · Compatible with all 3M Cold Shrink Termination Products and RJS Series Phase Rejacketing Sleeves. Rejacketing Sleeve 3MTM 3/C Phase Rejacketing System 3M RJS Series Rejacketing Sleeves are designed so that 3M Cold Shrink QTII & QTIII Silicone Rubber Terminations can be used on 3/C (three conductor) medium voltage shielded power cables of tape shield, wire shield, armored and non-armored configurations. RJS Rejacketing Assemblies are a series of silicone rubber insulators incorporating an inner-expandable polyester braid designed to reduce sliding friction and deliver the insulator onto the cable. Rejacketing sleeves are designed to protect the phase legs (core) of 3/C shielded power cable from exposure to moisture, corrosion, ozone, ultra-violet radiation, physical contact and other hazards that are associated with termination operating environments. Rejacketing sleeves are designed to be used in conjunction with 3M Cold Shrink Breakout Boots and Silicone Rubber Terminations. Features and Benefits: · Versatile; installs quickly and accommodates a wide range of cable sizes. · Simple hand application; no need for special installation tools. · Excellent resistance to ozone and ultra-violet radiation · Good solvent resistance; compatible with industry ­ approved cable cleaners. · Easy to adjust sleeve length; adapts to variable equipment connection and mounting requirements. [. . . ] Austin, TX 78726-9000 800/245 3573 http://www. 3M. com/elpd Litho in USA. 40% Pre-consumer waste paper 10% Post-consumer waste paper © 3M 1998 80-6109-4259-3 [. . . ]