User manual 3M 3M-MATIC 110A MANUALLY ADJUSTABLE SEMI-AUTOMATIC CASE SEALER

[. . . ] 3M-MaticTM Adjustable Case Sealer 110a Specifications: Box: Style: Regular slotted container (RSC) Size: Min Length 6" (150 mm) Width 6" (150 mm*) Height 3. 5" (90 mm) Footprint: Infeed/Exit Conveyor L Max No limit 22. 5" (575 mm) 22. 5" (575 mm) 3 3M-MaticTM Adjustable Case Sealer 110a Box Travel F W A F Note: Cartons smaller than 9. 2" (235 mm) in width may require more frequent belt replacement because of limited contact area. [. . . ] If any 3M-warrantied part is proved to be defective within its warranty period, then the exclusive remedy and 3M's and seller's sole obligation shall be, at 3M's option, to repair or replace the part, provided the defective part is returned immediately to 3M's factory or an authorized service station designated by 3M. A part will be presumed to have become defective after its warranty period unless the part is received or 3M is notified of the problem no later than five (5) calendar days after the warranty period. If 3M is unable to repair or replace the part within a reasonable time, then 3M, at its option, will replace the equipment or refund the purchase price. 3M shall have no obligation to provide or pay for the labor required to install the repaired or replacement part. 3M shall have no obligation to repair or replace (1) those parts failing due to operator misuse, carelessness, or due to any accidental cause other than equipment failure, or (2) parts failing due to non-lubrication, inadequate cleaning, improper operating environment, improper utilities or operator error. Limitation of Liability: 3M and seller shall not be liable for direct, indirect, special, incidental or consequential damages based upon breach of warranty, breach of contract, negligence, strict liability or any other legal theory. The foregoing Warranty and Limited Remedy and Limitation of Liability may be changed only by a written agreement signed by authorized officers of 3M and seller. 3 Industrial Business Industrial Adhesives and Tapes Division Bldg. Paul, MN 55106 1-800-362-3550 www. 3M. com/packaging AccuGlideTM, 3M-MaticTM, and Scotch® are trademarks of 3M. [. . . ] cases Tape drum latch · Secures tape roll for stable tape mounting Adjustable friction brake drum · Up to 16" tape diameter · Designed for use with a full range of Scotch® Box Sealing Tapes in 36 mm to 48 mm widths Centrally-located emergency stop · Easily accessible e-stop Independently-mounted side guides · Keeps cases centrally positioned under the taping head · Adjust for wide box width range Optional infeed/exit conveyor · Ball bearing rollers for smooth box conveying Optional top flap compression rollers (not shown) · Positions and closes flaps before taping for an improved seal · No gaps between flaps Box Capacities Length: 6" to no limit Width: 6" to 22. 5" Height: 3. 5" to 22. 5" [. . . ]