User manual 3M 02-2004 REMOVING DEFECTS FROM THE SIDES OF KNEES ROBOTIC

[. . . ] Application Profile Market: Orthopedic Medical Implant Devices Application Description: Removing casting scale and minor defects from the side of knees (robotic application) 241571 Key Application Requirements Remove casting scale and minor surface defects from cobalt chrome knees using robotics, while leaving a consistent, high quality finish. PRODUCT 3MTM TrizactTM CF Belt, grade A160 3MTM TrizactTM Belt 307EA, grade A65 ­ A16 3MTM TrizactTM Belt 217EA, grade A65 ­ A16 Products Replaced Competitive ceramic-based J weight conventional coated abrasive belts in grade P120. Advantages/Benefits To Customer Consistent, improved finishes 3M Trizact CF Belt features a macroreplicated matrix of resin and aluminum oxide mineral on a flexible X weight cloth backing. The structure is designed to break down under moderate to high grinding pressure, exposing fresh mineral to the grinding/polishing interface. [. . . ] The remaining gate is removed using coated abrasives before the part goes to the finishing/polishing department. The condyles and patella track on each knee are first machined using diamond wheels, to remove any remaining witness line from the gates and sides of the knee. The sides of the knee, often referred to as the "C" area, have historically been finished using a conventional coated abrasive, either off-hand on a "backstand" or (more commonly) utilizing robotics. When robotics systems are used, the cell typically consists of four belt heads. The first head is used to remove casting scale and any minor defects from the sides of the knee, the toughest abrasive application in the system. As a means of improving performance, ceramic-based conventional abrasives are commonly used on this first head. Even with ceramicbased conventional abrasives, this head typically produces only 1/5 the number of parts per belt than the other three belt heads. In these operations, using Trizact CF Belt in grade A160 on the first abrasive head can increase the belt life on the first head significantly, more closely matching the belt life on the other three belt heads. Recommended Trizact Process Belt Head #1 #2 #3 #4 Application Scale removal on "C" area of knee Head #1 refinement Head #2 refinement Head #3 refinement; final finish for buff Recommended Trizact Sequence Trizact CF Grade A160 Trizact 307EA or 217EA Grade A65 Trizact 307EA or 217EA Grade A30 Trizact 307EA or 217EA Grade A16 Competitive Coated Abrasive X wt Grade P120 Recommended Belt Speeds Cobalt Chrome: 6, 000 ­ 7, 200 SFPM Contact Wheel Selection Product Trizact CF Grade A160 Trizact 307EA or 217EA Grade A65 ­ A16 Contact Wheel Durometer Hard (60­70) Soft (20­30) Contact Wheel Serration Pattern Mild (1:1) Plain face or soft smooth foam Market: Orthopedic Medical Implant Devices Application Description: Removing casting scale and minor defects from the side of knees (robotic application) page 3 Related Applications "Removing casting scale and minor defects from hip stems on a backstand" Safety Information Always read and follow all safety information included with the product. To request additional product information or to arrange for sales assistance, call 1-800-362-3550. Address correspondence to: 3M Industrial Business Customer Response Center, Building 21-1W-10, 900 Bush Avenue, St. All statements, technical information and recommendations contained in this document are based upon tests or experience that 3M believes are reliable. However, many factors beyond 3M's control can affect the use and performance of a 3M product in a particular application, including the conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. [. . . ] If the 3M product is defective within the warranty period, your exclusive remedy and 3M's and seller's sole obligation will be, at 3M's option, to replace the product or refund the purchase price. Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including warranty, contract, negligence, or strict liability. For Additional Information Product Use Warranty and Limited Remedy Limitation of Liability Trizact is a trademark of 3M. Industrial Business Building 21-1W-10, 900 Bush Avenue St. [. . . ]