User manual 100NITROUS HANSPREE HANSPAD 10.1

[. . . ] This icon indicates notes and information that should be read before using the camera. These icons indicate other pages containing relevant information; E: “Reference Section”, F: “Technical Notes and Index. ” • SD and SDHC/SDXC memory cards are referred to as “memory cards” in this manual. • The setting at the time of purchase is referred to as the “default setting. ” • The names of menu items displayed in the camera monitor, and the names of buttons or messages displayed on a computer monitor appear in bold. • In this manual, images are sometimes omitted from monitor display samples so that monitor indicators can be more clearly shown. [. . . ] - Lighting or other bright areas may leave residual images when the camera is moved. • Depending on the distance to the subject or the amount of zoom applied, subjects with repeating patterns (fabrics, lattice windows, etc. ) may have colored stripes (interference patterns, moire, etc. ) in them during movie recording and playback. This occurs when the pattern in the subject and the layout of the image sensor interfere with each other; it is not a malfunction. 72 B Notes About Vibration Reduction During Movie Recording • When Movie VR (A75) in the movie menu is set to On (hybrid), the angle of view (i. e. , the area visible in the frame) becomes narrower during movie recording. • When using a tripod to stabilize the camera during recording, set Movie VR to Off to prevent potential errors caused by this function. B Camera Temperature Recording and Playing Back Movies • The camera may become warm when shooting movies for an extended period of time or when the camera is used in a hot area. • If the inside of the camera becomes extremely hot when recording movies, the camera will automatically stop recording. The amount of time remaining until the camera stops recording (B10s) is displayed. Leave the camera off until the inside of the camera has cooled. B Notes About Autofocus Autofocus may not perform as expected (A65). Set AF area mode to Center and Autofocus mode to Single AF (default setting) in the movie menu before starting movie recording. Frame another subject—positioned at the same distance from the camera as the intended subject—in the center of the frame, press the b (e movie-record) button to start recording, and then modify the composition. 73 Saving Still Images While Recording Movies If the shutter-release button is pressed all the way while recording a movie, one frame is saved as a still image. • The image size of the still images to be saved is the same as the Movie options (A75) setting. Recording and Playing Back Movies 14m30s B Notes About Saving Still Images During Movie Recording • Still images cannot be saved during movie recording in the following situations. - When movie recording is paused - When the remaining movie length is less than 5 seconds - When Movie options is set to Z 1080/60i, U 1080/50i, g 480/30p, W 480/25p or HS movie • Frames of a movie that were recorded when a still image was being taken may not be played back in a seamless manner. Allows you to reset the camera’s settings to their default values. View the current camera firmware version. A E72 E73 E73 E74 Blink warning E75 General Camera Setup Eye-Fi upload E76 E77 E77 Reset all Firmware version 79 Using the Wi-Fi (Wireless LAN) Function Functions That Can Be Performed Using Wi-Fi You can perform the following functions if you install the dedicated software “Wireless Mobile Utility” on your smart device that runs on Android OS or iOS, and connect it to the camera. Using the Wi-Fi (Wireless LAN) Function Take Photos You can take still images using the two methods described below. • Release the shutter on the camera and save the captured images to a smart device. • Use a smart device to remotely* release the camera shutter and save images to the smart device. * Operations cannot be performed on the camera during remote control operation. View Photos You can copy the images saved in the camera’s memory card and view them on your smart device. Installing the Software on the Smart Device 1 2 Use your smart device to connect to Google Play Store, App Store or other online apps marketplace and search for “Wireless Mobile Utility. ” • Check the user’s manual provided with your smart device for further details. Check the description and other information and install the software. • For more information about how to operate the software, download the user’s manual from the website below. - Android OS: http://nikonimglib. com/ManDL/WMAU/ - iOS: http://nikonimglib. com/ManDL/WMAU-ios/ 80 Connecting the Smart Device to the Camera Press the d button M q menu icon M k button 1 Use the multi selector HI to select Connect to smart device and press the k button. • If Connect to smart device cannot be selected, see “Notes About Wi-Fi Connection” (A82). • When the Wi-Fi function is turned on, the SSID and password of the camera are displayed. • If no connection confirmation is received from the smart device within 3 minutes, the message “No access. ” is displayed and the camera returns to the Wi-Fi options screen. Connect to smart device Disable Wi-Fi Options Using the Wi-Fi (Wireless LAN) Function Current settings Restore default settings Connect to smart device SSID: XXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXX Password: XXXXXXXXXXXXXXXXXX Back Cancel 2 Set the Wi-Fi setting on the smart device to On. • Check the user’s manual provided with your smart device for further details. • After the network name (SSID) that can be used for the smart device is displayed, select the SSID displayed on the camera. • When the message for entering a password is displayed, enter the password that is displayed on the camera. • When the camera is successfully connected to a Wi-Fi network, the shooting screen is displayed on the camera with the Wi-Fi communication indicator (A7). 3 Start the “Wireless Mobile Utility” installed on the smart device. • The screen for selecting “Take photos” or “View photos” is displayed. • When the message “Cannot connect to camera. ” is displayed, return to step 1 and retry the procedure. 81 To Terminate the Wi-Fi Connection Perform one of the following operations. [. . . ] 29, 77, E51 o Exposure compensation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 56, 69, 75, 78 b (e movie-record) button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57, 75, E41, E59 B Backlighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Battery-chamber/memory card slot cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]